Windows

Microsoft Windows is the most popular operating system in the world.
Windows error summary,total 2286. Hope to help you solve Windows problems.

Windows XP/7/8/10 – The operation completed successfully
Windows XP/7/8/10 – Incorrect function
Windows XP/7/8/10 – The system cannot find the file specified
Windows XP/7/8/10 – The system cannot find the path specified
Windows XP/7/8/10 – The system cannot open the file
Windows XP/7/8/10 – Access is denied
Windows XP/7/8/10 – The handle is invalid
Windows XP/7/8/10 – The storage control blocks were destroyed
Windows XP/7/8/10 – Not enough storage is available to process this command
Windows XP/7/8/10 – The storage control block address is invalid
Windows XP/7/8/10 – The environment is incorrect
Windows XP/7/8/10 – An attempt was made to load a program with an incorrect format
Windows XP/7/8/10 – The access code is invalid
Windows XP/7/8/10 – The data is invalid
Windows XP/7/8/10 – Not enough storage is available to complete this operation
Windows XP/7/8/10 – The system cannot find the drive specified
Windows XP/7/8/10 – The directory cannot be removed
Windows XP/7/8/10 – The system cannot move the file to a different disk drive
Windows XP/7/8/10 – There are no more files
Windows XP/7/8/10 – The media is write protected
Windows XP/7/8/10 – The system cannot find the device specified
Windows XP/7/8/10 – The device is not ready
Windows XP/7/8/10 – The device does not recognize the command
Windows XP/7/8/10 – Data error (cyclic redundancy check)
Windows XP/7/8/10 – The program issued a command but the command length is incorrect
Windows XP/7/8/10 – The drive cannot locate a specific area or track on the disk
Windows XP/7/8/10 – The specified disk or diskette cannot be accessed
Windows XP/7/8/10 – The drive cannot find the sector requested
Windows XP/7/8/10 – The printer is out of paper
Windows XP/7/8/10 – The system cannot write to the specified device
Windows XP/7/8/10 – The system cannot read from the specified device
Windows XP/7/8/10 – A device attached to the system is not functioning
Windows XP/7/8/10 – The process cannot access the file because it is being used by another process
Windows XP/7/8/10 – The process cannot access the file because another process has locked a portion of the file
Windows XP/7/8/10 – The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1
Windows XP/7/8/10 – Too many files opened for sharing
Windows XP/7/8/10 – Reached the end of the file
Windows XP/7/8/10 – The disk is full
Windows XP/7/8/10 – The request is not supported
Windows XP/7/8/10 – Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator
Windows XP/7/8/10 – You were not connected because a duplicate name exists on the network. If joining a domain, go to System in Control Panel to change the computer name and try again. If joining a workgroup, choose another workgroup name
Windows XP/7/8/10 – The network path was not found
Windows XP/7/8/10 – The network is busy
Windows XP/7/8/10 – The specified network resource or device is no longer available
Windows XP/7/8/10 – The network BIOS command limit has been reached
Windows XP/7/8/10 – A network adapter hardware error occurred
Windows XP/7/8/10 – The specified server cannot perform the requested operation
Windows XP/7/8/10 – An unexpected network error occurred
Windows XP/7/8/10 – The remote adapter is not compatible
Windows XP/7/8/10 – The printer queue is full
Windows XP/7/8/10 – Space to store the file waiting to be printed is not available on the server
Windows XP/7/8/10 – Your file waiting to be printed was deleted
Windows XP/7/8/10 – The specified network name is no longer available
Windows XP/7/8/10 – Network access is denied
Windows XP/7/8/10 – The network resource type is not correct
Windows XP/7/8/10 – The network name cannot be found
Windows XP/7/8/10 – The name limit for the local computer network adapter card was exceeded
Windows XP/7/8/10 – The network BIOS session limit was exceeded
Windows XP/7/8/10 – The remote server has been paused or is in the process of being started
Windows XP/7/8/10 – No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept
Windows XP/7/8/10 – The specified printer or disk device has been paused
Windows XP/7/8/10 – The file exists
Windows XP/7/8/10 – The directory or file cannot be created
Windows XP/7/8/10 – Fail on INT 24
Windows XP/7/8/10 – Storage to process this request is not available
Windows XP/7/8/10 – The local device name is already in use
Windows XP/7/8/10 – The specified network password is not correct
Windows XP/7/8/10 – The parameter is incorrect
Windows XP/7/8/10 – A write fault occurred on the network
Windows XP/7/8/10 – The system cannot start another process at this time
Windows XP/7/8/10 – Cannot create another system semaphore
Windows XP/7/8/10 – The exclusive semaphore is owned by another process
Windows XP/7/8/10 – The semaphore is set and cannot be closed
Windows XP/7/8/10 – The semaphore cannot be set again
Windows XP/7/8/10 – Cannot request exclusive semaphores at interrupt time
Windows XP/7/8/10 – The previous ownership of this semaphore has ended
Windows XP/7/8/10 – Insert the diskette for drive %1
Windows XP/7/8/10 – The program stopped because an alternate diskette was not inserted
Windows XP/7/8/10 – The disk is in use or locked by another process
Windows XP/7/8/10 – The pipe has been ended
Windows XP/7/8/10 – The system cannot open the device or file specified
Windows XP/7/8/10 – The file name is too long
Windows XP/7/8/10 – There is not enough space on the disk
Windows XP/7/8/10 – No more internal file identifiers available
Windows XP/7/8/10 – The target internal file identifier is incorrect
Windows XP/7/8/10 – The IOCTL call made by the application program is not correct
Windows XP/7/8/10 – The verify-on-write switch parameter value is not correct
Windows XP/7/8/10 – The system does not support the command requested
Windows XP/7/8/10 – This function is not supported on this system
Windows XP/7/8/10 – The semaphore timeout period has expired
Windows XP/7/8/10 – The data area passed to a system call is too small
Windows XP/7/8/10 – The filename, directory name, or volume label syntax is incorrect
Windows XP/7/8/10 – The system call level is not correct
Windows XP/7/8/10 – The disk has no volume label
Windows XP/7/8/10 – The specified module could not be found
Windows XP/7/8/10 – The specified procedure could not be found
Windows XP/7/8/10 – There are no child processes to wait for
Windows XP/7/8/10 – The %1 application cannot be run in Win32 mode
Windows XP/7/8/10 – Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O
Windows XP/7/8/10 – An attempt was made to move the file pointer before the beginning of the file
Windows XP/7/8/10 – The file pointer cannot be set on the specified device or file
Windows XP/7/8/10 – A JOIN or SUBST command cannot be used for a drive that contains previously joined drives
Windows XP/7/8/10 – An attempt was made to use a JOIN or SUBST command on a drive that has already been joined
Windows XP/7/8/10 – An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted
Windows XP/7/8/10 – The system tried to delete the JOIN of a drive that is not joined
Windows XP/7/8/10 – The system tried to delete the substitution of a drive that is not substituted
Windows XP/7/8/10 – The system tried to join a drive to a directory on a joined drive
Windows XP/7/8/10 – The system tried to substitute a drive to a directory on a substituted drive
Windows XP/7/8/10 – The system tried to join a drive to a directory on a substituted drive
Windows XP/7/8/10 – The system tried to SUBST a drive to a directory on a joined drive
Windows XP/7/8/10 – The system cannot perform a JOIN or SUBST at this time
Windows XP/7/8/10 – The system cannot join or substitute a drive to or for a directory on the same drive
Windows XP/7/8/10 – The directory is not a subdirectory of the root directory
Windows XP/7/8/10 – The directory is not empty
Windows XP/7/8/10 – The path specified is being used in a substitute
Windows XP/7/8/10 – Not enough resources are available to process this command
Windows XP/7/8/10 – The path specified cannot be used at this time
Windows XP/7/8/10 – An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute
Windows XP/7/8/10 – System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed
Windows XP/7/8/10 – The number of specified semaphore events for DosMuxSemWait is not correct
Windows XP/7/8/10 – DosMuxSemWait did not execute; too many semaphores are already set
Windows XP/7/8/10 – The DosMuxSemWait list is not correct
Windows XP/7/8/10 – The volume label you entered exceeds the label character limit of the target file system
Windows XP/7/8/10 – Cannot create another thread
Windows XP/7/8/10 – The recipient process has refused the signal
Windows XP/7/8/10 – The segment is already discarded and cannot be locked
Windows XP/7/8/10 – The segment is already unlocked
Windows XP/7/8/10 – The address for the thread ID is not correct
Windows XP/7/8/10 – One or more arguments are not correct
Windows XP/7/8/10 – The specified path is invalid
Windows XP/7/8/10 – A signal is already pending
Windows XP/7/8/10 – No more threads can be created in the system
Windows XP/7/8/10 – Unable to lock a region of a file
Windows XP/7/8/10 – The requested resource is in use
Windows XP/7/8/10 – A lock request was not outstanding for the supplied cancel region
Windows XP/7/8/10 – The file system does not support atomic changes to the lock type
Windows XP/7/8/10 – The system detected a segment number that was not correct
Windows XP/7/8/10 – The operating system cannot run %1
Windows XP/7/8/10 – Cannot create a file when that file already exists
Windows XP/7/8/10 – The flag passed is not correct
Windows XP/7/8/10 – The specified system semaphore name was not found
Windows XP/7/8/10 – The operating system cannot run %1
Windows XP/7/8/10 – The operating system cannot run %1
Windows XP/7/8/10 – The operating system cannot run %1
Windows XP/7/8/10 – Cannot run %1 in Win32 mode
Windows XP/7/8/10 – The operating system cannot run %1
Windows XP/7/8/10 – %1 is not a valid Win32 application
Windows XP/7/8/10 – The operating system cannot run %1
Windows XP/7/8/10 – The operating system cannot run %1
Windows XP/7/8/10 – The operating system cannot run this application program
Windows XP/7/8/10 – The operating system is not presently configured to run this application
Windows XP/7/8/10 – The operating system cannot run %1
Windows XP/7/8/10 – The operating system cannot run this application program
Windows XP/7/8/10 – The code segment cannot be greater than or equal to 64K
Windows XP/7/8/10 – The operating system cannot run %1
Windows XP/7/8/10 – The operating system cannot run %1
Windows XP/7/8/10 – The system could not find the environment option that was entered
Windows XP/7/8/10 – No process in the command subtree has a signal handler
Windows XP/7/8/10 – The filename or extension is too long
Windows XP/7/8/10 – The ring 2 stack is in use
Windows XP/7/8/10 – The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified
Windows XP/7/8/10 – The signal being posted is not correct
Windows XP/7/8/10 – The signal handler cannot be set
Windows XP/7/8/10 – The segment is locked and cannot be reallocated
Windows XP/7/8/10 – Too many dynamic-link modules are attached to this program or dynamic-link module
Windows XP/7/8/10 – Cannot nest calls to LoadModule
Windows XP/7/8/10 – This version of %1 is not compatible with the version of Windows you’re running. Check your computer’s system information to see whether you need a x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher
Windows XP/7/8/10 – The image file %1 is signed, unable to modify
Windows XP/7/8/10 – The image file %1 is strong signed, unable to modify
Windows XP/7/8/10 – This file is checked out or locked for editing by another user
Windows XP/7/8/10 – The file must be checked out before saving changes
Windows XP/7/8/10 – The file type being saved or retrieved has been blocked
Windows XP/7/8/10 – The file size exceeds the limit allowed and cannot be saved
Windows XP/7/8/10 – Access Denied. Before opening files in this location, you must first add the web site to your trusted sites list, browse to the web site, and select the option to login automatically
Windows XP/7/8/10 – Operation did not complete successfully because the file contains a virus
Windows XP/7/8/10 – This file contains a virus and cannot be opened. Due to the nature of this virus, the file has been removed from this location
Windows XP/7/8/10 – The pipe is local
Windows XP/7/8/10 – The pipe state is invalid
Windows XP/7/8/10 – All pipe instances are busy
Windows XP/7/8/10 – The pipe is being closed
Windows XP/7/8/10 – No process is on the other end of the pipe
Windows XP/7/8/10 – More data is available
Windows XP/7/8/10 – The session was canceled
Windows XP/7/8/10 – The specified extended attribute name was invalid
Windows XP/7/8/10 – The extended attributes are inconsistent
Windows XP/7/8/10 – The wait operation timed out
Windows XP/7/8/10 – No more data is available
Windows XP/7/8/10 – The copy functions cannot be used
Windows XP/7/8/10 – The directory name is invalid
Windows XP/7/8/10 – The extended attributes did not fit in the buffer
Windows XP/7/8/10 – The extended attribute file on the mounted file system is corrupt
Windows XP/7/8/10 – The extended attribute table file is full
Windows XP/7/8/10 – The specified extended attribute handle is invalid
Windows XP/7/8/10 – The mounted file system does not support extended attributes
Windows XP/7/8/10 – Attempt to release mutex not owned by caller
Windows XP/7/8/10 – Too many posts were made to a semaphore
Windows XP/7/8/10 – Only part of a ReadProcessMemory or WriteProcessMemory request was completed
Windows XP/7/8/10 – The oplock request is denied
Windows XP/7/8/10 – An invalid oplock acknowledgment was received by the system
Windows XP/7/8/10 – The volume is too fragmented to complete this operation
Windows XP/7/8/10 – The file cannot be opened because it is in the process of being deleted
Windows XP/7/8/10 – Short name settings may not be changed on this volume due to the global registry setting
Windows XP/7/8/10 – Short names are not enabled on this volume
Windows XP/7/8/10 – The security stream for the given volume is in an inconsistent state. Please run CHKDSK on the volume
Windows XP/7/8/10 – A requested file lock operation cannot be processed due to an invalid byte range
Windows XP/7/8/10 – The subsystem needed to support the image type is not present
Windows XP/7/8/10 – The specified file already has a notification GUID associated with it
Windows XP/7/8/10 – The system cannot find message text for message number 0x%1 in the message file for %2
Windows XP/7/8/10 – The scope specified was not found
Windows XP/7/8/10 – No action was taken as a system reboot is required
Windows XP/7/8/10 – The shutdown operation failed
Windows XP/7/8/10 – The restart operation failed
Windows XP/7/8/10 – The maximum number of sessions has been reached
Windows XP/7/8/10 – The thread is already in background processing mode
Windows XP/7/8/10 – The thread is not in background processing mode
Windows XP/7/8/10 – The process is already in background processing mode
Windows XP/7/8/10 – The process is not in background processing mode
Windows XP/7/8/10 – Attempt to access invalid address
Windows XP/7/8/10 – User profile cannot be loaded
Windows XP/7/8/10 – Arithmetic result exceeded 32 bits
Windows XP/7/8/10 – There is a process on other end of the pipe
Windows XP/7/8/10 – Waiting for a process to open the other end of the pipe
Windows XP/7/8/10 – Application verifier has found an error in the current process
Windows XP/7/8/10 – An error occurred in the ABIOS subsystem
Windows XP/7/8/10 – A warning occurred in the WX86 subsystem
Windows XP/7/8/10 – An error occurred in the WX86 subsystem
Windows XP/7/8/10 – An attempt was made to cancel or set a timer that has an associated APC and the subject thread is not the thread that originally set the timer with an associated APC routine
Windows XP/7/8/10 – Unwind exception code
Windows XP/7/8/10 – An invalid or unaligned stack was encountered during an unwind operation
Windows XP/7/8/10 – An invalid unwind target was encountered during an unwind operation
Windows XP/7/8/10 – Invalid Object Attributes specified to NtCreatePort or invalid Port Attributes specified to NtConnectPor
Windows XP/7/8/10 – Length of message passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message allowed by the port
Windows XP/7/8/10 – An attempt was made to lower a quota limit below the current usage
Windows XP/7/8/10 – An attempt was made to attach to a device that was already attached to another device
Windows XP/7/8/10 – An attempt was made to execute an instruction at an unaligned address and the host system does not support unaligned instruction references
Windows XP/7/8/10 – Profiling not started
Windows XP/7/8/10 – Profiling not stopped
Windows XP/7/8/10 – The passed ACL did not contain the minimum required information
Windows XP/7/8/10 – The number of active profiling objects is at the maximum and no more may be started
Windows XP/7/8/10 – Used to indicate that an operation cannot continue without blocking for I/O
Windows XP/7/8/10 – Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and it was the last thread in the current process
Windows XP/7/8/10 – If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception
Windows XP/7/8/10 – If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception
Windows XP/7/8/10 – If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception
Windows XP/7/8/10 – A malformed function table was encountered during an unwind operation
Windows XP/7/8/10 – Indicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the security descriptor could not be translated into a GUID that could be stored by the file system. This causes the protection attempt to fail, which may cause a file creation attempt to fail
Windows XP/7/8/10 – Indicates that an attempt was made to grow an LDT by setting its size, or that the size was not an even number of selectors
Windows XP/7/8/10 – Indicates that the starting value for the LDT information was not an integral multiple of the selector size
Windows XP/7/8/10 – Indicates that the user supplied an invalid descriptor when trying to set up Ldt descriptors
Windows XP/7/8/10 – Indicates a process has too many threads to perform the requested action. For example, assignment of a primary token may only be performed when a process has zero or one threads
Windows XP/7/8/10 – An attempt was made to operate on a thread within a specific process, but the thread specified is not in the process specified
Windows XP/7/8/10 – Page file quota was exceeded
Windows XP/7/8/10 – The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role
Windows XP/7/8/10 – The SAM database on a Windows Server is significantly out of synchronization with the copy on the Domain Controller. A complete synchronization is required
Windows XP/7/8/10 – The NtCreateFile API failed. This error should never be returned to an application, it is a place holder for the Windows Lan Manager Redirector to use in its internal error mapping routines
Windows XP/7/8/10 – {Privilege Failed} The I/O permissions for the process could not be changed
Windows XP/7/8/10 – {Application Exit by CTRL+C} The application terminated as a result of a CTRL+C
Windows XP/7/8/10 – {Missing System File} The required system file %hs is bad or missing
Windows XP/7/8/10 – {Application Error} The exception %s (0x%08lx) occurred in the application at location 0x%08lx
Windows XP/7/8/10 – {Application Error} The application was unable to start correctly (0x%lx). Click OK to close the application
Windows XP/7/8/10 – {Unable to Create Paging File} The creation of the paging file %hs failed (%lx). The requested size was %ld
Windows XP/7/8/10 – Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source
Windows XP/7/8/10 – {No Paging File Specified} No paging file was specified in the system configuration
Windows XP/7/8/10 – {EXCEPTION} A real-mode application issued a floating-point instruction and floating-point hardware is not present
Windows XP/7/8/10 – An event pair synchronization operation was performed using the thread specific client/server event pair object, but no event pair object was associated with the thread
Windows XP/7/8/10 – A Windows Server has an incorrect configuration
Windows XP/7/8/10 – An illegal character was encountered. For a multi-byte character set this includes a lead byte without a succeeding trail byte. For the Unicode character set this includes the characters 0xFFFF and 0xFFFE
Windows XP/7/8/10 – The Unicode character is not defined in the Unicode character set installed on the system
Windows XP/7/8/10 – The paging file cannot be created on a floppy diskette
Windows XP/7/8/10 – The system BIOS failed to connect a system interrupt to the device or bus for which the device is connected
Windows XP/7/8/10 – This operation is only allowed for the Primary Domain Controller of the domain
Windows XP/7/8/10 – An attempt was made to acquire a mutant such that its maximum count would have been exceeded
Windows XP/7/8/10 – A volume has been accessed for which a file system driver is required that has not yet been loaded
Windows XP/7/8/10 – {Registry File Failure} The registry cannot load the hive (file): %hs or its log or alternate. It is corrupt, absent, or not writable
Windows XP/7/8/10 – {Unexpected Failure in DebugActiveProcess} An unexpected failure occurred while processing a DebugActiveProcess API request. You may choose OK to terminate the process, or Cancel to ignore the error
Windows XP/7/8/10 – {Fatal System Error} The %hs system process terminated unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system has been shut down
Windows XP/7/8/10 – {Data Not Accepted} The TDI client could not handle the data received during an indication
Windows XP/7/8/10 – NTVDM encountered a hard error
Windows XP/7/8/10 – {Cancel Timeout} The driver %hs failed to complete a cancelled I/O request in the allotted time
Windows XP/7/8/10 – {Reply Message Mismatch} An attempt was made to reply to an LPC message, but the thread specified by the client ID in the message was not waiting on that message
Windows XP/7/8/10 – {Delayed Write Failed} Windows was unable to save all the data for the file %hs. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere
Windows XP/7/8/10 – The parameter(s) passed to the server in the client/server shared memory window were invalid. Too much data may have been put in the shared memory window
Windows XP/7/8/10 – The stream is not a tiny stream
Windows XP/7/8/10 – The request must be handled by the stack overflow code
Windows XP/7/8/10 – Internal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing onode is moved or the extent stream is converted to a large stream
Windows XP/7/8/10 – The attempt to find the object found an object matching by ID on the volume but it is out of the scope of the handle used for the operation
Windows XP/7/8/10 – The bucket array must be grown. Retry transaction after doing so
Windows XP/7/8/10 – The user/kernel marshalling buffer has overflowed
Windows XP/7/8/10 – The supplied variant structure contains invalid data
Windows XP/7/8/10 – The specified buffer contains ill-formed data
Windows XP/7/8/10 – {Audit Failed} An attempt to generate a security audit failed
Windows XP/7/8/10 – The timer resolution was not previously set by the current process
Windows XP/7/8/10 – There is insufficient account information to log you on
Windows XP/7/8/10 – {Invalid DLL Entrypoint} The dynamic link library %hs is not written correctly. The stack pointer has been left in an inconsistent state. The entrypoint should be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue execution. Selecting NO may cause the application to operate incorrectly
Windows XP/7/8/10 – {Invalid Service Callback Entrypoint} The %hs service is not written correctly. The stack pointer has been left in an inconsistent state. The callback entrypoint should be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue operation. However, the service process may operate incorrectly
Windows XP/7/8/10 – There is an IP address conflict with another system on the networ
Windows XP/7/8/10 – There is an IP address conflict with another system on the networ
Windows XP/7/8/10 – {Low On Registry Space} The system has reached the maximum size allowed for the system part of the registry. Additional storage requests will be ignored
Windows XP/7/8/10 – A callback return system service cannot be executed when no callback is active
Windows XP/7/8/10 – The password provided is too short to meet the policy of your user account. Please choose a longer password
Windows XP/7/8/10 – The policy of your user account does not allow you to change passwords too frequently. This is done to prevent users from changing back to a familiar, but potentially discovered, password. If you feel your password has been compromised then please contact your administrator immediately to have a new one assigned
Windows XP/7/8/10 – You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that you have not previously used
Windows XP/7/8/10 – The specified compression format is unsupported
Windows XP/7/8/10 – The specified hardware profile configuration is invalid
Windows XP/7/8/10 – The specified Plug and Play registry device path is invalid
Windows XP/7/8/10 – The specified quota list is internally inconsistent with its descriptor
Windows XP/7/8/10 – {Windows Evaluation Notification} The evaluation period for this installation of Windows has expired. This system will shutdown in 1 hour. To restore access to this installation of Windows, please upgrade this installation using a licensed distribution of this product
Windows XP/7/8/10 – {Illegal System DLL Relocation} The system DLL %hs was relocated in memory. The application will not run properly. The relocation occurred because the DLL %hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL
Windows XP/7/8/10 – {DLL Initialization Failed} The application failed to initialize because the window station is shutting down
Windows XP/7/8/10 – The validation process needs to continue on to the next step
Windows XP/7/8/10 – There are no more matches for the current index enumeration
Windows XP/7/8/10 – The range could not be added to the range list because of a conflict
Windows XP/7/8/10 – The server process is running under a SID different than that required by client
Windows XP/7/8/10 – A group marked use for deny only cannot be enabled
Windows XP/7/8/10 – {EXCEPTION} Multiple floating point faults
Windows XP/7/8/10 – {EXCEPTION} Multiple floating point traps
Windows XP/7/8/10 – The requested interface is not supported
Windows XP/7/8/10 – {System Standby Failed} The driver %hs does not support standby mode. Updating this driver may allow the system to go to standby mode
Windows XP/7/8/10 – The system file %1 has become corrupt and has been replaced
Windows XP/7/8/10 – {Virtual Memory Minimum Too Low} Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. During this process, memory requests for some applications may be denied. For more information, see Help
Windows XP/7/8/10 – A device was removed so enumeration must be restarted
Windows XP/7/8/10 – {Fatal System Error} The system image %s is not properly signed. The file has been replaced with the signed file. The system has been shut down
Windows XP/7/8/10 – Device will not start without a reboot
Windows XP/7/8/10 – There is not enough power to complete the requested operation
Windows XP/7/8/10 – ERROR_MULTIPLE_FAULT_VIOLATIO
Windows XP/7/8/10 – The system is in the process of shutting down
Windows XP/7/8/10 – An attempt to remove a processes DebugPort was made, but a port was not already associated with the process
Windows XP/7/8/10 – This version of Windows is not compatible with the behavior version of directory forest, domain or domain controller
Windows XP/7/8/10 – The specified range could not be found in the range list
Windows XP/7/8/10 – The driver was not loaded because the system is booting into safe mode
Windows XP/7/8/10 – The driver was not loaded because it failed it’s initialization call
Windows XP/7/8/10 – The “%hs” encountered an error while applying power or reading the device configuration. This may be caused by a failure of your hardware or by a poor connection
Windows XP/7/8/10 – The create operation failed because the name contained at least one mount point which resolves to a volume to which the specified device object is not attached
Windows XP/7/8/10 – The device object parameter is either not a valid device object or is not attached to the volume specified by the file name
Windows XP/7/8/10 – A Machine Check Error has occurred. Please check the system eventlog for additional information
Windows XP/7/8/10 – There was error [%2] processing the driver database
Windows XP/7/8/10 – System hive size has exceeded its limit
Windows XP/7/8/10 – The driver could not be loaded because a previous version of the driver is still in memory
Windows XP/7/8/10 – {Volume Shadow Copy Service} Please wait while the Volume Shadow Copy Service prepares volume %hs for hibernation
Windows XP/7/8/10 – The system has failed to hibernate (The error code is %hs). Hibernation will be disabled until the system is restarted
Windows XP/7/8/10 – The requested operation could not be completed due to a file system limitatio
Windows XP/7/8/10 – An assertion failure has occurred
Windows XP/7/8/10 – An error occurred in the ACPI subsystem
Windows XP/7/8/10 – WOW Assertion Error
Windows XP/7/8/10 – A device is missing in the system BIOS MPS table. This device will not be used. Please contact your system vendor for system BIOS update
Windows XP/7/8/10 – A translator failed to translate resources
Windows XP/7/8/10 – A IRQ translator failed to translate resources
Windows XP/7/8/10 – Driver %2 returned invalid ID for a child device (%3)
Windows XP/7/8/10 – {Kernel Debugger Awakened} the system debugger was awakened by an interrupt
Windows XP/7/8/10 – {Handles Closed} Handles to objects have been automatically closed as a result of the requested operation
Windows XP/7/8/10 – {Too Much Information} The specified access control list (ACL) contained more information than was expected
Windows XP/7/8/10 – This warning level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted. The commit has NOT been completed, but has not been rolled back either (so it may still be committed if desired)
Windows XP/7/8/10 – {Media Changed} The media may have changed
Windows XP/7/8/10 – {GUID Substitution} During the translation of a global identifier (GUID) to a Windows security ID (SID), no administratively-defined GUID prefix was found. A substitute prefix was used, which will not compromise system security. However, this may provide a more restrictive access than intended
Windows XP/7/8/10 – The create operation stopped after reaching a symbolic lin
Windows XP/7/8/10 – A long jump has been executed
Windows XP/7/8/10 – The Plug and Play query operation was not successful
Windows XP/7/8/10 – A frame consolidation has been executed
Windows XP/7/8/10 – {Registry Hive Recovered} Registry hive (file): %hs was corrupted and it has been recovered. Some data might have been lost
Windows XP/7/8/10 – The application is attempting to run executable code from the module %hs. This may be insecure. An alternative, %hs, is available. Should the application use the secure module %hs
Windows XP/7/8/10 – The application is loading executable code from the module %hs. This is secure, but may be incompatible with previous releases of the operating system. An alternative, %hs, is available. Should the application use the secure module %hs
Windows XP/7/8/10 – Debugger did not handle the exception
Windows XP/7/8/10 – Debugger will reply later
Windows XP/7/8/10 – Debugger cannot provide handle
Windows XP/7/8/10 – Debugger terminated thread
Windows XP/7/8/10 – Debugger terminated process
Windows XP/7/8/10 – Debugger got control C
Windows XP/7/8/10 – Debugger printed exception on control C
Windows XP/7/8/10 – Debugger received RIP exception
Windows XP/7/8/10 – Debugger received control break
Windows XP/7/8/10 – Debugger command communication exception
Windows XP/7/8/10 – {Object Exists} An attempt was made to create an object and the object name already existed
Windows XP/7/8/10 – {Thread Suspended} A thread termination occurred while the thread was suspended. The thread was resumed, and termination proceeded
Windows XP/7/8/10 – {Image Relocated} An image file could not be mapped at the address specified in the image file. Local fixups must be performed on this image
Windows XP/7/8/10 – This informational level status indicates that a specified registry sub-tree transaction state did not yet exist and had to be created
Windows XP/7/8/10 – {Segment Load} A virtual DOS machine (VDM) is loading, unloading, or moving an MS-DOS or Win16 program segment image. An exception is raised so a debugger can load, unload or track symbols and breakpoints within these 16-bit segments
Windows XP/7/8/10 – {Invalid Current Directory} The process cannot switch to the startup current directory %hs. Select OK to set current directory to %hs, or select CANCEL to exit
Windows XP/7/8/10 – {Redundant Read} To satisfy a read request, the NT fault-tolerant file system successfully read the requested data from a redundant copy. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was unable to reassign the failing area of the device
Windows XP/7/8/10 – {Redundant Write} To satisfy a write request, the NT fault-tolerant file system successfully wrote a redundant copy of the information. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was not able to reassign the failing area of the device
Windows XP/7/8/10 – {Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine. Select OK to continue, or CANCEL to fail the DLL load
Windows XP/7/8/10 – {Partial Data Received} The network transport returned partial data to its client. The remaining data will be sent later
Windows XP/7/8/10 – {Expedited Data Received} The network transport returned data to its client that was marked as expedited by the remote system
Windows XP/7/8/10 – {Partial Expedited Data Received} The network transport returned partial data to its client and this data was marked as expedited by the remote system. The remaining data will be sent later
Windows XP/7/8/10 – {TDI Event Done} The TDI indication has completed successfully
Windows XP/7/8/10 – {TDI Event Pending} The TDI indication has entered the pending state
Windows XP/7/8/10 – Checking file system on %w
Windows XP/7/8/10 – {Fatal Application Exit} %h
Windows XP/7/8/10 – The specified registry key is referenced by a predefined handle
Windows XP/7/8/10 – {Page Unlocked} The page protection of a locked page was changed to ‘No Access’ and the page was unlocked from memory and from the process
Windows XP/7/8/10 – %h
Windows XP/7/8/10 – {Page Locked} One of the pages to lock was already locked
Windows XP/7/8/10 – Application popup: %1 : %
Windows XP/7/8/10 – ERROR_ALREADY_WIN3
Windows XP/7/8/10 – {Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine
Windows XP/7/8/10 – A yield execution was performed and no thread was available to run
Windows XP/7/8/10 – The resumable flag to a timer API was ignored
Windows XP/7/8/10 – The arbiter has deferred arbitration of these resources to its paren
Windows XP/7/8/10 – The inserted CardBus device cannot be started because of a configuration error on “%hs”
Windows XP/7/8/10 – The CPUs in this multiprocessor system are not all the same revision level. To use all processors the operating system restricts itself to the features of the least capable processor in the system. Should problems occur with this system, contact the CPU manufacturer to see if this mix of processors is supported
Windows XP/7/8/10 – The system was put into hibernation
Windows XP/7/8/10 – The system was resumed from hibernation
Windows XP/7/8/10 – Windows has detected that the system firmware (BIOS) was updated [previous firmware date = %2, current firmware date %3]
Windows XP/7/8/10 – A device driver is leaking locked I/O pages causing system degradation. The system has automatically enabled tracking code in order to try and catch the culprit
Windows XP/7/8/10 – The system has awoke
Windows XP/7/8/10 – ERROR_WAIT_
Windows XP/7/8/10 – ERROR_WAIT_
Windows XP/7/8/10 – ERROR_WAIT_
Windows XP/7/8/10 – ERROR_WAIT_6
Windows XP/7/8/10 – ERROR_ABANDONED_WAIT_
Windows XP/7/8/10 – ERROR_ABANDONED_WAIT_6
Windows XP/7/8/10 – ERROR_USER_AP
Windows XP/7/8/10 – ERROR_KERNEL_AP
Windows XP/7/8/10 – ERROR_ALERTE
Windows XP/7/8/10 – The requested operation requires elevation
Windows XP/7/8/10 – A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link
Windows XP/7/8/10 – An open/create operation completed while an oplock break is underway
Windows XP/7/8/10 – A new volume has been mounted by a file system
Windows XP/7/8/10 – This success level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted. The commit has now been completed
Windows XP/7/8/10 – This indicates that a notify change request has been completed due to closing the handle which made the notify change request
Windows XP/7/8/10 – {Connect Failure on Primary Transport} An attempt was made to connect to the remote server %hs on the primary transport, but the connection failed. The computer WAS able to connect on a secondary transport
Windows XP/7/8/10 – Page fault was a transition fault
Windows XP/7/8/10 – Page fault was a demand zero fault
Windows XP/7/8/10 – Page fault was a demand zero fault
Windows XP/7/8/10 – Page fault was a demand zero fault
Windows XP/7/8/10 – Page fault was satisfied by reading from a secondary storage device
Windows XP/7/8/10 – Cached page was locked during operation
Windows XP/7/8/10 – Crash dump exists in paging file
Windows XP/7/8/10 – Specified buffer contains all zeros
Windows XP/7/8/10 – A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link
Windows XP/7/8/10 – The device has succeeded a query-stop and its resource requirements have changed
Windows XP/7/8/10 – The translator has translated these resources into the global space and no further translations should be performed
Windows XP/7/8/10 – A process being terminated has no threads to terminate
Windows XP/7/8/10 – The specified process is not part of a job
Windows XP/7/8/10 – The specified process is part of a job
Windows XP/7/8/10 – {Volume Shadow Copy Service} The system is now ready for hibernation
Windows XP/7/8/10 – A file system or file system filter driver has successfully completed an FsFilter operation
Windows XP/7/8/10 – The specified interrupt vector was already connected
Windows XP/7/8/10 – The specified interrupt vector is still connected
Windows XP/7/8/10 – An operation is blocked waiting for an oplock
Windows XP/7/8/10 – Debugger handled exceptio
Windows XP/7/8/10 – Debugger continue
Windows XP/7/8/10 – An exception occurred in a user mode callback and the kernel callback frame should be removed
Windows XP/7/8/10 – Compression is disabled for this volume
Windows XP/7/8/10 – The data provider cannot fetch backwards through a result set
Windows XP/7/8/10 – The data provider cannot scroll backwards through a result set
Windows XP/7/8/10 – The data provider requires that previously fetched data is released before asking for more data
Windows XP/7/8/10 – The data provider was not able to interpret the flags set for a column binding in an accessor
Windows XP/7/8/10 – One or more errors occurred while processing the request
Windows XP/7/8/10 – The implementation is not capable of performing the request
Windows XP/7/8/10 – The client of a component requested an operation which is not valid given the state of the component instance
Windows XP/7/8/10 – A version number could not be parsed
Windows XP/7/8/10 – The iterator’s start position is invalid
Windows XP/7/8/10 – The hardware has reported an uncorrectable memory error
Windows XP/7/8/10 – The attempted operation required self healing to be enabled
Windows XP/7/8/10 – The Desktop heap encountered an error while allocating session memory. There is more information in the system event log
Windows XP/7/8/10 – The system power state is transitioning from %2 to %3
Windows XP/7/8/10 – The system power state is transitioning from %2 to %3 but could enter %4
Windows XP/7/8/10 – A thread is getting dispatched with MCA EXCEPTION because of MCA
Windows XP/7/8/10 – Access to %1 is monitored by policy rule %2
Windows XP/7/8/10 – Access to %1 has been restricted by your Administrator by policy rule %2
Windows XP/7/8/10 – A valid hibernation file has been invalidated and should be abandoned
Windows XP/7/8/10 – {Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error may be caused by network connectivity issues. Please try to save this file elsewhere
Windows XP/7/8/10 – {Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error was returned by the server on which the file exists. Please try to save this file elsewhere
Windows XP/7/8/10 – {Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error may be caused if the device has been removed or the media is write-protected
Windows XP/7/8/10 – The resources required for this device conflict with the MCFG table
Windows XP/7/8/10 – The oplock that was associated with this handle is now associated with a different handle
Windows XP/7/8/10 – An oplock of the requested level cannot be granted. An oplock of a lower level may be available
Windows XP/7/8/10 – The operation did not complete successfully because it would cause an oplock to be broken. The caller has requested that existing oplocks not be broken
Windows XP/7/8/10 – The handle with which this oplock was associated has been closed. The oplock is now broken
Windows XP/7/8/10 – The specified access control entry (ACE) does not contain a condition
Windows XP/7/8/10 – The specified access control entry (ACE) contains an invalid condition
Windows XP/7/8/10 – Access to the extended attribute was denied
Windows XP/7/8/10 – The I/O operation has been aborted because of either a thread exit or an application request
Windows XP/7/8/10 – Overlapped I/O event is not in a signaled state
Windows XP/7/8/10 – Overlapped I/O operation is in progress
Windows XP/7/8/10 – Invalid access to memory location
Windows XP/7/8/10 – Error performing inpage operation
Windows XP/7/8/10 – Recursion too deep; the stack overflowed
Windows XP/7/8/10 – The window cannot act on the sent message
Windows XP/7/8/10 – Cannot complete this function
Windows XP/7/8/10 – Invalid flags
Windows XP/7/8/10 – The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted
Windows XP/7/8/10 – The volume for a file has been externally altered so that the opened file is no longer valid
Windows XP/7/8/10 – The requested operation cannot be performed in full-screen mode
Windows XP/7/8/10 – An attempt was made to reference a token that does not exist
Windows XP/7/8/10 – The configuration registry database is corrupt
Windows XP/7/8/10 – The configuration registry key is invalid
Windows XP/7/8/10 – The configuration registry key could not be opened
Windows XP/7/8/10 – The configuration registry key could not be read
Windows XP/7/8/10 – The configuration registry key could not be written
Windows XP/7/8/10 – One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful
Windows XP/7/8/10 – The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system’s memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted
Windows XP/7/8/10 – An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system’s image of the registry
Windows XP/7/8/10 – The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format
Windows XP/7/8/10 – Illegal operation attempted on a registry key that has been marked for deletion
Windows XP/7/8/10 – System could not allocate the required space in a registry log
Windows XP/7/8/10 – Cannot create a symbolic link in a registry key that already has subkeys or values
Windows XP/7/8/10 – Cannot create a stable subkey under a volatile parent key
Windows XP/7/8/10 – A notify change request is being completed and the information is not being returned in the caller’s buffer. The caller now needs to enumerate the files to find the changes
Windows XP/7/8/10 – A stop control has been sent to a service that other running services are dependent on
Windows XP/7/8/10 – The requested control is not valid for this service
Windows XP/7/8/10 – The service did not respond to the start or control request in a timely fashion
Windows XP/7/8/10 – A thread could not be created for the service
Windows XP/7/8/10 – The service database is locked
Windows XP/7/8/10 – An instance of the service is already running
Windows XP/7/8/10 – The account name is invalid or does not exist, or the password is invalid for the account name specified
Windows XP/7/8/10 – The service cannot be started, either because it is disabled or because it has no enabled devices associated with it
Windows XP/7/8/10 – Circular service dependency was specified
Windows XP/7/8/10 – The specified service does not exist as an installed service
Windows XP/7/8/10 – The service cannot accept control messages at this time
Windows XP/7/8/10 – The service has not been started
Windows XP/7/8/10 – The service process could not connect to the service controller
Windows XP/7/8/10 – An exception occurred in the service when handling the control request
Windows XP/7/8/10 – The database specified does not exist
Windows XP/7/8/10 – The service has returned a service-specific error code
Windows XP/7/8/10 – The process terminated unexpectedly
Windows XP/7/8/10 – The dependency service or group failed to start
Windows XP/7/8/10 – The service did not start due to a logon failure
Windows XP/7/8/10 – After starting, the service hung in a start-pending state
Windows XP/7/8/10 – The specified service database lock is invalid
Windows XP/7/8/10 – The specified service has been marked for deletion
Windows XP/7/8/10 – The specified service already exists
Windows XP/7/8/10 – The system is currently running with the last-known-good configuration
Windows XP/7/8/10 – The dependency service does not exist or has been marked for deletion
Windows XP/7/8/10 – The current boot has already been accepted for use as the last-known-good control set
Windows XP/7/8/10 – No attempts to start the service have been made since the last boot
Windows XP/7/8/10 – The name is already in use as either a service name or a service display name
Windows XP/7/8/10 – The account specified for this service is different from the account specified for other services running in the same process
Windows XP/7/8/10 – Failure actions can only be set for Win32 services, not for drivers
Windows XP/7/8/10 – This service runs in the same process as the service control manager. Therefore, the service control manager cannot take action if this service’s process terminates unexpectedly
Windows XP/7/8/10 – No recovery program has been configured for this service
Windows XP/7/8/10 – The executable program that this service is configured to run in does not implement the service
Windows XP/7/8/10 – This service cannot be started in Safe Mod
Windows XP/7/8/10 – The physical end of the tape has been reached
Windows XP/7/8/10 – A tape access reached a filemark
Windows XP/7/8/10 – The beginning of the tape or a partition was encountered
Windows XP/7/8/10 – A tape access reached the end of a set of files
Windows XP/7/8/10 – No more data is on the tape
Windows XP/7/8/10 – Tape could not be partitioned
Windows XP/7/8/10 – When accessing a new tape of a multivolume partition, the current block size is incorrect
Windows XP/7/8/10 – Tape partition information could not be found when loading a tape
Windows XP/7/8/10 – Unable to lock the media eject mechanism
Windows XP/7/8/10 – Unable to unload the media
Windows XP/7/8/10 – The media in the drive may have changed
Windows XP/7/8/10 – The I/O bus was reset
Windows XP/7/8/10 – No media in drive
Windows XP/7/8/10 – No mapping for the Unicode character exists in the target multi-byte code page
Windows XP/7/8/10 – A dynamic link library (DLL) initialization routine failed
Windows XP/7/8/10 – A system shutdown is in progress
Windows XP/7/8/10 – Unable to abort the system shutdown because no shutdown was in progress
Windows XP/7/8/10 – The request could not be performed because of an I/O device error
Windows XP/7/8/10 – No serial device was successfully initialized. The serial driver will unload
Windows XP/7/8/10 – Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened
Windows XP/7/8/10 – A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.
Windows XP/7/8/10 – A serial I/O operation completed because the timeout period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.
Windows XP/7/8/10 – No ID address mark was found on the floppy disk
Windows XP/7/8/10 – Mismatch between the floppy disk sector ID field and the floppy disk controller track address
Windows XP/7/8/10 – The floppy disk controller reported an error that is not recognized by the floppy disk driver
Windows XP/7/8/10 – The floppy disk controller returned inconsistent results in its registers
Windows XP/7/8/10 – While accessing the hard disk, a recalibrate operation failed, even after retries
Windows XP/7/8/10 – While accessing the hard disk, a disk operation failed even after retries
Windows XP/7/8/10 – While accessing the hard disk, a disk controller reset was needed, but even that failed
Windows XP/7/8/10 – Physical end of tape encountered
Windows XP/7/8/10 – Not enough server storage is available to process this command
Windows XP/7/8/10 – A potential deadlock condition has been detected
Windows XP/7/8/10 – The base address or the file offset specified does not have the proper alignment
Windows XP/7/8/10 – An attempt to change the system power state was vetoed by another application or driver
Windows XP/7/8/10 – The system BIOS failed an attempt to change the system power state
Windows XP/7/8/10 – An attempt was made to create more links on a file than the file system supports
Windows XP/7/8/10 – The specified program requires a newer version of Windows
Windows XP/7/8/10 – The specified program is not a Windows or MS-DOS program
Windows XP/7/8/10 – Cannot start more than one instance of the specified program
Windows XP/7/8/10 – The specified program was written for an earlier version of Windows
Windows XP/7/8/10 – One of the library files needed to run this application is damaged
Windows XP/7/8/10 – No application is associated with the specified file for this operation
Windows XP/7/8/10 – An error occurred in sending the command to the application
Windows XP/7/8/10 – One of the library files needed to run this application cannot be found
Windows XP/7/8/10 – The current process has used all of its system allowance of handles for Window Manager objects
Windows XP/7/8/10 – The message can be used only with synchronous operations
Windows XP/7/8/10 – The indicated source element has no media
Windows XP/7/8/10 – The indicated destination element already contains media
Windows XP/7/8/10 – The indicated element does not exist
Windows XP/7/8/10 – The indicated element is part of a magazine that is not present
Windows XP/7/8/10 – The indicated device requires reinitialization due to hardware errors
Windows XP/7/8/10 – The device has indicated that cleaning is required before further operations are attempted
Windows XP/7/8/10 – The device has indicated that its door is open
Windows XP/7/8/10 – The device is not connected
Windows XP/7/8/10 – Element not found
Windows XP/7/8/10 – There was no match for the specified key in the index
Windows XP/7/8/10 – The property set specified does not exist on the object
Windows XP/7/8/10 – The point passed to GetMouseMovePoints is not in the buffer
Windows XP/7/8/10 – The tracking (workstation) service is not running
Windows XP/7/8/10 – The Volume ID could not be found
Windows XP/7/8/10 – Unable to remove the file to be replaced
Windows XP/7/8/10 – Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name
Windows XP/7/8/10 – Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name
Windows XP/7/8/10 – The volume change journal is being deleted
Windows XP/7/8/10 – The volume change journal is not active
Windows XP/7/8/10 – A file was found, but it may not be the correct file
Windows XP/7/8/10 – The journal entry has been deleted from the journal
Windows XP/7/8/10 – A system shutdown has already been scheduled
Windows XP/7/8/10 – The system shutdown cannot be initiated because there are other users logged on to the computer
Windows XP/7/8/10 – The specified device name is invalid
Windows XP/7/8/10 – The device is not currently connected but it is a remembered connection
Windows XP/7/8/10 – The local device name has a remembered connection to another network resource
Windows XP/7/8/10 – The network path was either typed incorrectly, does not exist, or the network provider is not currently available. Please try retyping the path or contact your network administrator
Windows XP/7/8/10 – The specified network provider name is invalid
Windows XP/7/8/10 – Unable to open the network connection profile
Windows XP/7/8/10 – The network connection profile is corrupted
Windows XP/7/8/10 – Cannot enumerate a noncontainer
Windows XP/7/8/10 – An extended error has occurred
Windows XP/7/8/10 – The format of the specified group name is invalid
Windows XP/7/8/10 – The format of the specified computer name is invalid
Windows XP/7/8/10 – The format of the specified event name is invalid
Windows XP/7/8/10 – The format of the specified domain name is invalid
Windows XP/7/8/10 – The format of the specified service name is invalid
Windows XP/7/8/10 – The format of the specified network name is invalid
Windows XP/7/8/10 – The format of the specified share name is invalid
Windows XP/7/8/10 – The format of the specified password is invalid
Windows XP/7/8/10 – The format of the specified message name is invalid
Windows XP/7/8/10 – The format of the specified message destination is invalid
Windows XP/7/8/10 – Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again
Windows XP/7/8/10 – An attempt was made to establish a session to a network server, but there are already too many sessions established to that server
Windows XP/7/8/10 – The workgroup or domain name is already in use by another computer on the network
Windows XP/7/8/10 – The network is not present or not started
Windows XP/7/8/10 – The operation was canceled by the user
Windows XP/7/8/10 – The requested operation cannot be performed on a file with a user-mapped section open
Windows XP/7/8/10 – The remote computer refused the network connection
Windows XP/7/8/10 – The network connection was gracefully closed
Windows XP/7/8/10 – The network transport endpoint already has an address associated with it
Windows XP/7/8/10 – An address has not yet been associated with the network endpoint
Windows XP/7/8/10 – An operation was attempted on a nonexistent network connection
Windows XP/7/8/10 – An invalid operation was attempted on an active network connection
Windows XP/7/8/10 – The network location cannot be reached. For information about network troubleshooting, see Windows Help
Windows XP/7/8/10 – The network location cannot be reached. For information about network troubleshooting, see Windows Help
Windows XP/7/8/10 – The network location cannot be reached. For information about network troubleshooting, see Windows Help
Windows XP/7/8/10 – No service is operating at the destination network endpoint on the remote system
Windows XP/7/8/10 – The request was aborted
Windows XP/7/8/10 – The network connection was aborted by the local system
Windows XP/7/8/10 – The operation could not be completed. A retry should be performed
Windows XP/7/8/10 – A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached
Windows XP/7/8/10 – Attempting to log in during an unauthorized time of day for this account
Windows XP/7/8/10 – The account is not authorized to log in from this station
Windows XP/7/8/10 – The network address could not be used for the operation requested
Windows XP/7/8/10 – The service is already registered
Windows XP/7/8/10 – The specified service does not exist
Windows XP/7/8/10 – The operation being requested was not performed because the user has not been authenticated
Windows XP/7/8/10 – The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist
Windows XP/7/8/10 – Continue with work in progress
Windows XP/7/8/10 – An attempt was made to perform an initialization operation when initialization has already been completed
Windows XP/7/8/10 – No more local devices
Windows XP/7/8/10 – The specified site does not exist
Windows XP/7/8/10 – A domain controller with the specified name already exists
Windows XP/7/8/10 – This operation is supported only when you are connected to the server
Windows XP/7/8/10 – The group policy framework should call the extension even if there are no changes
Windows XP/7/8/10 – The specified user does not have a valid profile
Windows XP/7/8/10 – This operation is not supported on a computer running Windows Server 2003 for Small Business Serve
Windows XP/7/8/10 – The server machine is shutting down
Windows XP/7/8/10 – The remote system is not available. For information about network troubleshooting, see Windows Help
Windows XP/7/8/10 – The security identifier provided is not from an account domain
Windows XP/7/8/10 – The security identifier provided does not have a domain component
Windows XP/7/8/10 – AppHelp dialog canceled thus preventing the application from starting
Windows XP/7/8/10 – This program is blocked by group policy. For more information, contact your system administrator
Windows XP/7/8/10 – A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific
Windows XP/7/8/10 – The share is currently offline or does not exist
Windows XP/7/8/10 – The Kerberos protocol encountered an error while validating the KDC certificate during smartcard logon. There is more information in the system event log
Windows XP/7/8/10 – The Kerberos protocol encountered an error while attempting to utilize the smartcard subsystem
Windows XP/7/8/10 – The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you
Windows XP/7/8/10 – The machine is locked and cannot be shut down without the force option
Windows XP/7/8/10 – An application-defined callback gave invalid data when called
Windows XP/7/8/10 – The group policy framework should call the extension in the synchronous foreground policy refresh
Windows XP/7/8/10 – This driver has been blocked from loadin
Windows XP/7/8/10 – A dynamic link library (DLL) referenced a module that was neither a DLL nor the process’s executable image
Windows XP/7/8/10 – Windows cannot open this program since it has been disabled
Windows XP/7/8/10 – Windows cannot open this program because the license enforcement system has been tampered with or become corrupted
Windows XP/7/8/10 – A transaction recover failed
Windows XP/7/8/10 – The current thread has already been converted to a fiber
Windows XP/7/8/10 – The current thread has already been converted from a fiber
Windows XP/7/8/10 – The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application
Windows XP/7/8/10 – Data present in one of the parameters is more than the function can operate on
Windows XP/7/8/10 – An attempt to do an operation on a debug object failed because the object is in the process of being deleted
Windows XP/7/8/10 – An attempt to delay-load a .dll or get a function address in a delay-loaded .dll failed
Windows XP/7/8/10 – %1 is a 16-bit application. You do not have permissions to execute 16-bit applications. Check your permissions with your system administrator
Windows XP/7/8/10 – Insufficient information exists to identify the cause of failure
Windows XP/7/8/10 – The parameter passed to a C runtime function is incorrect
Windows XP/7/8/10 – The operation occurred beyond the valid data length of the file
Windows XP/7/8/10 – The service start failed since one or more services in the same process have an incompatible service SID type setting. A service with restricted service SID type can only coexist in the same process with other services with a restricted SID type. If the service SID type for this service was just configured, the hosting process must be restarted in order to start this service
Windows XP/7/8/10 – The process hosting the driver for this device has been terminated
Windows XP/7/8/10 – An operation attempted to exceed an implementation-defined limit
Windows XP/7/8/10 – Either the target process, or the target thread’s containing process, is a protected process
Windows XP/7/8/10 – The service notification client is lagging too far behind the current state of services in the machine
Windows XP/7/8/10 – The requested file operation failed because the storage quota was exceeded. To free up disk space, move files to a different location or delete unnecessary files. For more information, contact your system administrator
Windows XP/7/8/10 – The requested file operation failed because the storage policy blocks that type of file. For more information, contact your system administrator
Windows XP/7/8/10 – A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view the service configuration and the account configuration
Windows XP/7/8/10 – A thread involved in this operation appears to be unresponsive
Windows XP/7/8/10 – Indicates a particular Security ID may not be assigned as the label of an object
Windows XP/7/8/10 – Not all privileges or groups referenced are assigned to the caller
Windows XP/7/8/10 – Some mapping between account names and security IDs was not done
Windows XP/7/8/10 – No system quota limits are specifically set for this account
Windows XP/7/8/10 – No encryption key is available. A well-known encryption key was returned
Windows XP/7/8/10 – The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string
Windows XP/7/8/10 – The revision level is unknown
Windows XP/7/8/10 – Indicates two revision levels are incompatible
Windows XP/7/8/10 – This security ID may not be assigned as the owner of this object
Windows XP/7/8/10 – This security ID may not be assigned as the primary group of an object
Windows XP/7/8/10 – An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client
Windows XP/7/8/10 – The group may not be disabled
Windows XP/7/8/10 – There are currently no logon servers available to service the logon request
Windows XP/7/8/10 – A specified logon session does not exist. It may already have been terminated
Windows XP/7/8/10 – A specified privilege does not exist
Windows XP/7/8/10 – A required privilege is not held by the client
Windows XP/7/8/10 – The name provided is not a properly formed account name
Windows XP/7/8/10 – The specified account already exists
Windows XP/7/8/10 – The specified account does not exist
Windows XP/7/8/10 – The specified group already exists
Windows XP/7/8/10 – The specified group does not exist
Windows XP/7/8/10 – Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member
Windows XP/7/8/10 – The specified user account is not a member of the specified group account
Windows XP/7/8/10 – The last remaining administration account cannot be disabled or deleted
Windows XP/7/8/10 – Unable to update the password. The value provided as the current password is incorrect
Windows XP/7/8/10 – Unable to update the password. The value provided for the new password contains values that are not allowed in passwords
Windows XP/7/8/10 – Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirements of the domain
Windows XP/7/8/10 – Logon failure: unknown user name or bad password
Windows XP/7/8/10 – Logon failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a policy restriction has been enforced
Windows XP/7/8/10 – Logon failure: account logon time restriction violation
Windows XP/7/8/10 – Logon failure: user not allowed to log on to this computer
Windows XP/7/8/10 – Logon failure: the specified account password has expired
Windows XP/7/8/10 – Logon failure: account currently disabled
Windows XP/7/8/10 – No mapping between account names and security IDs was done
Windows XP/7/8/10 – Too many local user identifiers (LUIDs) were requested at one time
Windows XP/7/8/10 – No more local user identifiers (LUIDs) are available
Windows XP/7/8/10 – The subauthority part of a security ID is invalid for this particular use
Windows XP/7/8/10 – The access control list (ACL) structure is invalid
Windows XP/7/8/10 – The security ID structure is invalid
Windows XP/7/8/10 – The security descriptor structure is invalid
Windows XP/7/8/10 – The inherited access control list (ACL) or access control entry (ACE) could not be built
Windows XP/7/8/10 – The server is currently disabled
Windows XP/7/8/10 – The server is currently enabled
Windows XP/7/8/10 – The value provided was an invalid value for an identifier authority
Windows XP/7/8/10 – No more memory is available for security information updates
Windows XP/7/8/10 – The specified attributes are invalid, or incompatible with the attributes for the group as a whole
Windows XP/7/8/10 – Either a required impersonation level was not provided, or the provided impersonation level is invalid
Windows XP/7/8/10 – Cannot open an anonymous level security token
Windows XP/7/8/10 – The validation information class requested was invalid
Windows XP/7/8/10 – The type of the token is inappropriate for its attempted use
Windows XP/7/8/10 – Unable to perform a security operation on an object that has no associated security
Windows XP/7/8/10 – Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied
Windows XP/7/8/10 – The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation
Windows XP/7/8/10 – The domain was in the wrong state to perform the security operation
Windows XP/7/8/10 – This operation is only allowed for the Primary Domain Controller of the domain
Windows XP/7/8/10 – The specified domain either does not exist or could not be contacted
Windows XP/7/8/10 – The specified domain already exists
Windows XP/7/8/10 – An attempt was made to exceed the limit on the number of domains per server
Windows XP/7/8/10 – Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk
Windows XP/7/8/10 – An internal error occurred
Windows XP/7/8/10 – Generic access types were contained in an access mask which should already be mapped to nongeneric types
Windows XP/7/8/10 – A security descriptor is not in the right format (absolute or self-relative)
Windows XP/7/8/10 – The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process
Windows XP/7/8/10 – Cannot start a new logon session with an ID that is already in use
Windows XP/7/8/10 – A specified authentication package is unknown
Windows XP/7/8/10 – The logon session is not in a state that is consistent with the requested operation
Windows XP/7/8/10 – The logon session ID is already in use
Windows XP/7/8/10 – A logon request contained an invalid logon type value
Windows XP/7/8/10 – Unable to impersonate using a named pipe until data has been read from that pipe
Windows XP/7/8/10 – The transaction state of a registry subtree is incompatible with the requested operation
Windows XP/7/8/10 – An internal security database corruption has been encountered
Windows XP/7/8/10 – Cannot perform this operation on built-in accounts
Windows XP/7/8/10 – Cannot perform this operation on this built-in special group
Windows XP/7/8/10 – Cannot perform this operation on this built-in special user
Windows XP/7/8/10 – The user cannot be removed from a group because the group is currently the user’s primary group
Windows XP/7/8/10 – The token is already in use as a primary token
Windows XP/7/8/10 – The specified local group does not exist
Windows XP/7/8/10 – The specified account name is not a member of the group
Windows XP/7/8/10 – The specified account name is already a member of the group
Windows XP/7/8/10 – The specified local group already exists
Windows XP/7/8/10 – Logon failure: the user has not been granted the requested logon type at this computer
Windows XP/7/8/10 – The maximum number of secrets that may be stored in a single system has been exceeded
Windows XP/7/8/10 – The length of a secret exceeds the maximum length allowed
Windows XP/7/8/10 – The local security authority database contains an internal inconsistency
Windows XP/7/8/10 – During a logon attempt, the user’s security context accumulated too many security IDs
Windows XP/7/8/10 – Logon failure: the user has not been granted the requested logon type at this computer
Windows XP/7/8/10 – A cross-encrypted password is necessary to change a user password
Windows XP/7/8/10 – A member could not be added to or removed from the local group because the member does not exist
Windows XP/7/8/10 – A new member could not be added to a local group because the member has the wrong account type
Windows XP/7/8/10 – Too many security IDs have been specified
Windows XP/7/8/10 – A cross-encrypted password is necessary to change this user password
Windows XP/7/8/10 – Indicates an ACL contains no inheritable components
Windows XP/7/8/10 – The file or directory is corrupted and unreadable
Windows XP/7/8/10 – The disk structure is corrupted and unreadable
Windows XP/7/8/10 – There is no user session key for the specified logon session
Windows XP/7/8/10 – The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept
Windows XP/7/8/10 – Logon Failure: The target account name is incorrect
Windows XP/7/8/10 – Mutual Authentication failed. The server’s password is out of date at the domain controller
Windows XP/7/8/10 – There is a time and/or date difference between the client and server
Windows XP/7/8/10 – This operation cannot be performed on the current domain
Windows XP/7/8/10 – Invalid window handle
Windows XP/7/8/10 – Invalid menu handle
Windows XP/7/8/10 – Invalid cursor handle
Windows XP/7/8/10 – Invalid accelerator table handle
Windows XP/7/8/10 – Invalid hook handle
Windows XP/7/8/10 – Invalid handle to a multiple-window position structure
Windows XP/7/8/10 – Cannot create a top-level child window
Windows XP/7/8/10 – Cannot find window class
Windows XP/7/8/10 – Invalid window; it belongs to other thread
Windows XP/7/8/10 – Hot key is already registered
Windows XP/7/8/10 – Class already exists
Windows XP/7/8/10 – Class does not exist
Windows XP/7/8/10 – Class still has open windows
Windows XP/7/8/10 – Invalid index
Windows XP/7/8/10 – Invalid icon handle
Windows XP/7/8/10 – Using private DIALOG window words
Windows XP/7/8/10 – The list box identifier was not found
Windows XP/7/8/10 – No wildcards were found
Windows XP/7/8/10 – Thread does not have a clipboard open
Windows XP/7/8/10 – Hot key is not registered
Windows XP/7/8/10 – The window is not a valid dialog window
Windows XP/7/8/10 – Control ID not found
Windows XP/7/8/10 – Invalid message for a combo box because it does not have an edit control
Windows XP/7/8/10 – The window is not a combo box
Windows XP/7/8/10 – Height must be less than 256
Windows XP/7/8/10 – Invalid device context (DC) handle
Windows XP/7/8/10 – Invalid hook procedure type
Windows XP/7/8/10 – Invalid hook procedure
Windows XP/7/8/10 – Cannot set nonlocal hook without a module handle
Windows XP/7/8/10 – This hook procedure can only be set globally
Windows XP/7/8/10 – The journal hook procedure is already installed
Windows XP/7/8/10 – The hook procedure is not installed
Windows XP/7/8/10 – Invalid message for single-selection list box
Windows XP/7/8/10 – LB_SETCOUNT sent to non-lazy list box
Windows XP/7/8/10 – This list box does not support tab stops
Windows XP/7/8/10 – Cannot destroy object created by another thread
Windows XP/7/8/10 – Child windows cannot have menus
Windows XP/7/8/10 – The window does not have a system menu
Windows XP/7/8/10 – Invalid message box style
Windows XP/7/8/10 – Invalid system-wide (SPI_*) parameter
Windows XP/7/8/10 – Screen already locked
Windows XP/7/8/10 – All handles to windows in a multiple-window position structure must have the same parent
Windows XP/7/8/10 – The window is not a child window
Windows XP/7/8/10 – Invalid GW_* command
Windows XP/7/8/10 – Invalid thread identifier
Windows XP/7/8/10 – Cannot process a message from a window that is not a multiple document interface (MDI) window
Windows XP/7/8/10 – Popup menu already active
Windows XP/7/8/10 – The window does not have scroll bars
Windows XP/7/8/10 – Scroll bar range cannot be greater than MAXLONG
Windows XP/7/8/10 – Cannot show or remove the window in the way specified
Windows XP/7/8/10 – Insufficient system resources exist to complete the requested service
Windows XP/7/8/10 – Insufficient system resources exist to complete the requested service
Windows XP/7/8/10 – Insufficient system resources exist to complete the requested service
Windows XP/7/8/10 – Insufficient quota to complete the requested service
Windows XP/7/8/10 – Insufficient quota to complete the requested service
Windows XP/7/8/10 – The paging file is too small for this operation to complete
Windows XP/7/8/10 – A menu item was not found
Windows XP/7/8/10 – Invalid keyboard layout handle
Windows XP/7/8/10 – Hook type not allowed
Windows XP/7/8/10 – This operation requires an interactive window station
Windows XP/7/8/10 – This operation returned because the timeout period expired
Windows XP/7/8/10 – Invalid monitor handle
Windows XP/7/8/10 – Incorrect size argument
Windows XP/7/8/10 – The symbolic link cannot be followed because its type is disabled
Windows XP/7/8/10 – This application does not support the current operation on symbolic links
Windows XP/7/8/10 – Windows was unable to parse the requested XML data
Windows XP/7/8/10 – An error was encountered while processing an XML digital signature
Windows XP/7/8/10 – This application must be restarted
Windows XP/7/8/10 – The caller made the connection request in the wrong routing compartment
Windows XP/7/8/10 – There was an AuthIP failure when attempting to connect to the remote host
Windows XP/7/8/10 – Insufficient NVRAM resources exist to complete the requested service. A reboot might be required
Windows XP/7/8/10 – The event log file is corrupted
Windows XP/7/8/10 – No event log file could be opened, so the event logging service did not start
Windows XP/7/8/10 – The event log file is full
Windows XP/7/8/10 – The event log file has changed between read operations
Windows XP/7/8/10 – The specified task name is invalid
Windows XP/7/8/10 – The specified task index is invalid
Windows XP/7/8/10 – The specified thread is already joining a task
Windows XP/7/8/10 – The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance
Windows XP/7/8/10 – User cancelled installation
Windows XP/7/8/10 – Fatal error during installation
Windows XP/7/8/10 – Installation suspended, incomplete
Windows XP/7/8/10 – This action is only valid for products that are currently installed
Windows XP/7/8/10 – Feature ID not registered
Windows XP/7/8/10 – Component ID not registered
Windows XP/7/8/10 – Unknown property
Windows XP/7/8/10 – Handle is in an invalid state
Windows XP/7/8/10 – The configuration data for this product is corrupt. Contact your support personnel
Windows XP/7/8/10 – Component qualifier not present
Windows XP/7/8/10 – The installation source for this product is not available. Verify that the source exists and that you can access it
Windows XP/7/8/10 – This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service
Windows XP/7/8/10 – Product is uninstalled
Windows XP/7/8/10 – SQL query syntax invalid or unsupported
Windows XP/7/8/10 – Record field does not exist
Windows XP/7/8/10 – The device has been removed
Windows XP/7/8/10 – Another installation is already in progress. Complete that installation before proceeding with this install
Windows XP/7/8/10 – This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package
Windows XP/7/8/10 – This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package
Windows XP/7/8/10 – There was an error starting the Windows Installer service user interface. Contact your support personnel
Windows XP/7/8/10 – Error opening installation log file. Verify that the specified log file location exists and that you can write to it
Windows XP/7/8/10 – The language of this installation package is not supported by your system
Windows XP/7/8/10 – Error applying transforms. Verify that the specified transform paths are valid
Windows XP/7/8/10 – This installation is forbidden by system policy. Contact your system administrator
Windows XP/7/8/10 – Function could not be executed
Windows XP/7/8/10 – Function failed during execution
Windows XP/7/8/10 – Invalid or unknown table specified
Windows XP/7/8/10 – Data supplied is of wrong type
Windows XP/7/8/10 – Data of this type is not supported
Windows XP/7/8/10 – The Windows Installer service failed to start. Contact your support personnel
Windows XP/7/8/10 – The Temp folder is on a drive that is full or is inaccessible. Free up space on the drive or verify that you have write permission on the Temp folder
Windows XP/7/8/10 – This installation package is not supported by this processor type. Contact your product vendor
Windows XP/7/8/10 – Component not used on this computer
Windows XP/7/8/10 – This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package
Windows XP/7/8/10 – This update package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer update package
Windows XP/7/8/10 – This update package cannot be processed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service
Windows XP/7/8/10 – Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel
Windows XP/7/8/10 – Invalid command line argument. Consult the Windows Installer SDK for detailed command line help
Windows XP/7/8/10 – Only administrators have permission to add, remove, or configure server software during a Terminal services remote session. If you want to install or configure software on the server, contact your network administrator
Windows XP/7/8/10 – The requested operation completed successfully. The system will be restarted so the changes can take effect
Windows XP/7/8/10 – The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade
Windows XP/7/8/10 – The update package is not permitted by software restriction policy
Windows XP/7/8/10 – One or more customizations are not permitted by software restriction policy
Windows XP/7/8/10 – The Windows Installer does not permit installation from a Remote Desktop Connection
Windows XP/7/8/10 – Uninstallation of the update package is not supported
Windows XP/7/8/10 – The update is not applied to this product
Windows XP/7/8/10 – No valid sequence could be found for the set of updates
Windows XP/7/8/10 – Update removal was disallowed by policy
Windows XP/7/8/10 – The XML update data is invalid
Windows XP/7/8/10 – Windows Installer does not permit updating of managed advertised products. At least one feature of the product must be installed before applying the update
Windows XP/7/8/10 – The Windows Installer service is not accessible in Safe Mode. Please try again when your computer is not in Safe Mode or you can use System Restore to return your machine to a previous good state
Windows XP/7/8/10 – A fail fast exception occurred. Exception handlers will not be invoked and the process will be terminated immediately
Windows XP/7/8/10 – The string binding is invalid
Windows XP/7/8/10 – The binding handle is not the correct type
Windows XP/7/8/10 – The binding handle is invalid
Windows XP/7/8/10 – The RPC protocol sequence is not supported
Windows XP/7/8/10 – The RPC protocol sequence is invalid
Windows XP/7/8/10 – The string universal unique identifier (UUID) is invalid
Windows XP/7/8/10 – The endpoint format is invalid
Windows XP/7/8/10 – The network address is invalid
Windows XP/7/8/10 – No endpoint was found
Windows XP/7/8/10 – The timeout value is invalid
Windows XP/7/8/10 – The object universal unique identifier (UUID) was not found
Windows XP/7/8/10 – The object universal unique identifier (UUID) has already been registered
Windows XP/7/8/10 – The type universal unique identifier (UUID) has already been registered
Windows XP/7/8/10 – The RPC server is already listening
Windows XP/7/8/10 – No protocol sequences have been registered
Windows XP/7/8/10 – The RPC server is not listening
Windows XP/7/8/10 – The manager type is unknown
Windows XP/7/8/10 – The interface is unknown
Windows XP/7/8/10 – There are no bindings
Windows XP/7/8/10 – There are no protocol sequences
Windows XP/7/8/10 – The endpoint cannot be created
Windows XP/7/8/10 – Not enough resources are available to complete this operation
Windows XP/7/8/10 – The RPC server is unavailable
Windows XP/7/8/10 – The RPC server is too busy to complete this operation
Windows XP/7/8/10 – The network options are invalid
Windows XP/7/8/10 – There are no remote procedure calls active on this thread
Windows XP/7/8/10 – The remote procedure call failed
Windows XP/7/8/10 – The remote procedure call failed and did not execute
Windows XP/7/8/10 – A remote procedure call (RPC) protocol error occurred
Windows XP/7/8/10 – Access to the HTTP proxy is denied
Windows XP/7/8/10 – The transfer syntax is not supported by the RPC server
Windows XP/7/8/10 – The universal unique identifier (UUID) type is not supported
Windows XP/7/8/10 – The tag is invalid
Windows XP/7/8/10 – The array bounds are invalid
Windows XP/7/8/10 – The binding does not contain an entry name
Windows XP/7/8/10 – The name syntax is invalid
Windows XP/7/8/10 – The name syntax is not supported
Windows XP/7/8/10 – No network address is available to use to construct a universal unique identifier (UUID)
Windows XP/7/8/10 – The endpoint is a duplicate
Windows XP/7/8/10 – The authentication type is unknown
Windows XP/7/8/10 – The maximum number of calls is too small
Windows XP/7/8/10 – The string is too long
Windows XP/7/8/10 – The RPC protocol sequence was not found
Windows XP/7/8/10 – The procedure number is out of range
Windows XP/7/8/10 – The binding does not contain any authentication information
Windows XP/7/8/10 – The authentication service is unknown
Windows XP/7/8/10 – The authentication level is unknown
Windows XP/7/8/10 – The security context is invalid
Windows XP/7/8/10 – The authorization service is unknown
Windows XP/7/8/10 – The entry is invalid
Windows XP/7/8/10 – The server endpoint cannot perform the operation
Windows XP/7/8/10 – There are no more endpoints available from the endpoint mapper
Windows XP/7/8/10 – No interfaces have been exported
Windows XP/7/8/10 – The entry name is incomplete
Windows XP/7/8/10 – The version option is invalid
Windows XP/7/8/10 – There are no more members
Windows XP/7/8/10 – There is nothing to unexport
Windows XP/7/8/10 – The interface was not found
Windows XP/7/8/10 – The entry already exists
Windows XP/7/8/10 – The entry is not found
Windows XP/7/8/10 – The name service is unavailable
Windows XP/7/8/10 – The network address family is invalid
Windows XP/7/8/10 – The requested operation is not supported
Windows XP/7/8/10 – No security context is available to allow impersonation
Windows XP/7/8/10 – An internal error occurred in a remote procedure call (RPC)
Windows XP/7/8/10 – The RPC server attempted an integer division by zero
Windows XP/7/8/10 – An addressing error occurred in the RPC server
Windows XP/7/8/10 – A floating-point operation at the RPC server caused a division by zero
Windows XP/7/8/10 – A floating-point underflow occurred at the RPC server
Windows XP/7/8/10 – A floating-point overflow occurred at the RPC server
Windows XP/7/8/10 – The list of RPC servers available for the binding of auto handles has been exhausted
Windows XP/7/8/10 – Unable to open the character translation table file
Windows XP/7/8/10 – The file containing the character translation table has fewer than 512 bytes
Windows XP/7/8/10 – A null context handle was passed from the client to the host during a remote procedure call
Windows XP/7/8/10 – The context handle changed during a remote procedure call
Windows XP/7/8/10 – The binding handles passed to a remote procedure call do not match
Windows XP/7/8/10 – The stub is unable to get the remote procedure call handle
Windows XP/7/8/10 – A null reference pointer was passed to the stub
Windows XP/7/8/10 – The enumeration value is out of range
Windows XP/7/8/10 – The byte count is too small
Windows XP/7/8/10 – The stub received bad data
Windows XP/7/8/10 – The supplied user buffer is not valid for the requested operation
Windows XP/7/8/10 – The disk media is not recognized. It may not be formatted
Windows XP/7/8/10 – The workstation does not have a trust secret
Windows XP/7/8/10 – The security database on the server does not have a computer account for this workstation trust relationship
Windows XP/7/8/10 – The trust relationship between the primary domain and the trusted domain failed
Windows XP/7/8/10 – The trust relationship between this workstation and the primary domain failed
Windows XP/7/8/10 – The network logon failed
Windows XP/7/8/10 – A remote procedure call is already in progress for this thread
Windows XP/7/8/10 – An attempt was made to logon, but the network logon service was not started
Windows XP/7/8/10 – The user’s account has expired
Windows XP/7/8/10 – The redirector is in use and cannot be unloaded
Windows XP/7/8/10 – The specified printer driver is already installed
Windows XP/7/8/10 – The specified port is unknown
Windows XP/7/8/10 – The printer driver is unknown
Windows XP/7/8/10 – The print processor is unknown
Windows XP/7/8/10 – The specified separator file is invalid
Windows XP/7/8/10 – The specified priority is invalid
Windows XP/7/8/10 – The printer name is invalid
Windows XP/7/8/10 – The printer already exists
Windows XP/7/8/10 – The printer command is invalid
Windows XP/7/8/10 – The specified datatype is invalid
Windows XP/7/8/10 – The environment specified is invalid
Windows XP/7/8/10 – There are no more bindings
Windows XP/7/8/10 – The account used is an interdomain trust account. Use your global user account or local user account to access this server
Windows XP/7/8/10 – The account used is a computer account. Use your global user account or local user account to access this server
Windows XP/7/8/10 – The account used is a server trust account. Use your global user account or local user account to access this server
Windows XP/7/8/10 – The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain
Windows XP/7/8/10 – The server is in use and cannot be unloaded
Windows XP/7/8/10 – The specified image file did not contain a resource section
Windows XP/7/8/10 – The specified resource type cannot be found in the image file
Windows XP/7/8/10 – The specified resource name cannot be found in the image file
Windows XP/7/8/10 – The specified resource language ID cannot be found in the image file
Windows XP/7/8/10 – Not enough quota is available to process this command
Windows XP/7/8/10 – No interfaces have been registered
Windows XP/7/8/10 – The remote procedure call was cancelled
Windows XP/7/8/10 – The binding handle does not contain all required information
Windows XP/7/8/10 – A communications failure occurred during a remote procedure call
Windows XP/7/8/10 – The requested authentication level is not supported
Windows XP/7/8/10 – No principal name registered
Windows XP/7/8/10 – The error specified is not a valid Windows RPC error code
Windows XP/7/8/10 – A UUID that is valid only on this computer has been allocated
Windows XP/7/8/10 – A security package specific error occurred
Windows XP/7/8/10 – Thread is not canceled
Windows XP/7/8/10 – Invalid operation on the encoding/decoding handle
Windows XP/7/8/10 – Incompatible version of the serializing package
Windows XP/7/8/10 – Incompatible version of the RPC stub
Windows XP/7/8/10 – The RPC pipe object is invalid or corrupted
Windows XP/7/8/10 – An invalid operation was attempted on an RPC pipe object
Windows XP/7/8/10 – Unsupported RPC pipe version
Windows XP/7/8/10 – HTTP proxy server rejected the connection because the cookie authentication failed
Windows XP/7/8/10 – The group member was not found
Windows XP/7/8/10 – The endpoint mapper database entry could not be created
Windows XP/7/8/10 – The object universal unique identifier (UUID) is the nil UUID
Windows XP/7/8/10 – The specified time is invalid
Windows XP/7/8/10 – The specified form name is invalid
Windows XP/7/8/10 – The specified form size is invalid
Windows XP/7/8/10 – The specified printer handle is already being waited o
Windows XP/7/8/10 – The specified printer has been deleted
Windows XP/7/8/10 – The state of the printer is invalid
Windows XP/7/8/10 – The user’s password must be changed before logging on the first time
Windows XP/7/8/10 – Could not find the domain controller for this domain
Windows XP/7/8/10 – The referenced account is currently locked out and may not be logged on to
Windows XP/7/8/10 – The object exporter specified was not found
Windows XP/7/8/10 – The object specified was not found
Windows XP/7/8/10 – The object resolver set specified was not found
Windows XP/7/8/10 – Some data remains to be sent in the request buffer
Windows XP/7/8/10 – Invalid asynchronous remote procedure call handle
Windows XP/7/8/10 – Invalid asynchronous RPC call handle for this operation
Windows XP/7/8/10 – The RPC pipe object has already been closed
Windows XP/7/8/10 – The RPC call completed before all pipes were processed
Windows XP/7/8/10 – No more data is available from the RPC pipe
Windows XP/7/8/10 – No site name is available for this machine
Windows XP/7/8/10 – The file cannot be accessed by the system
Windows XP/7/8/10 – The name of the file cannot be resolved by the system
Windows XP/7/8/10 – The entry is not of the expected type
Windows XP/7/8/10 – Not all object UUIDs could be exported to the specified entry
Windows XP/7/8/10 – Interface could not be exported to the specified entry
Windows XP/7/8/10 – The specified profile entry could not be added
Windows XP/7/8/10 – The specified profile element could not be added
Windows XP/7/8/10 – The specified profile element could not be removed
Windows XP/7/8/10 – The group element could not be added
Windows XP/7/8/10 – The group element could not be removed
Windows XP/7/8/10 – The printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers
Windows XP/7/8/10 – The context has expired and can no longer be used
Windows XP/7/8/10 – The current user’s delegated trust creation quota has been exceeded
Windows XP/7/8/10 – The total delegated trust creation quota has been exceeded
Windows XP/7/8/10 – The current user’s delegated trust deletion quota has been exceeded
Windows XP/7/8/10 – Logon Failure: The machine you are logging onto is protected by an authentication firewall. The specified account is not allowed to authenticate to the machine
Windows XP/7/8/10 – Remote connections to the Print Spooler are blocked by a policy set on your machine
Windows XP/7/8/10 – Logon Failure: Authentication failed because NTLM authentication has been disabled
Windows XP/7/8/10 – The pixel format is invalid
Windows XP/7/8/10 – The specified driver is invalid
Windows XP/7/8/10 – The window style or class attribute is invalid for this operation
Windows XP/7/8/10 – The requested metafile operation is not supported
Windows XP/7/8/10 – The requested transformation operation is not supported
Windows XP/7/8/10 – The requested clipping operation is not supported
Windows XP/7/8/10 – The specified color management module is invalid
Windows XP/7/8/10 – The specified color profile is invalid
Windows XP/7/8/10 – The specified tag was not found
Windows XP/7/8/10 – A required tag is not present
Windows XP/7/8/10 – The specified tag is already present
Windows XP/7/8/10 – The specified color profile is not associated with the specified device
Windows XP/7/8/10 – The specified color profile was not found
Windows XP/7/8/10 – The specified color space is invalid
Windows XP/7/8/10 – Image Color Management is not enabled
Windows XP/7/8/10 – There was an error while deleting the color transform
Windows XP/7/8/10 – The specified color transform is invalid
Windows XP/7/8/10 – The specified transform does not match the bitmap’s color space
Windows XP/7/8/10 – The specified named color index is not present in the profile
Windows XP/7/8/10 – The specified profile is intended for a device of a different type than the specified device
Windows XP/7/8/10 – The network connection was made successfully, but the user had to be prompted for a password other than the one originally specified
Windows XP/7/8/10 – The network connection was made successfully using default credentials
Windows XP/7/8/10 – The specified username is invalid
Windows XP/7/8/10 – This network connection does not exist
Windows XP/7/8/10 – This network connection has files open or requests pending
Windows XP/7/8/10 – Active connections still exist
Windows XP/7/8/10 – The device is in use by an active process and cannot be disconnected
Windows XP/7/8/10 – The specified print monitor is unknown
Windows XP/7/8/10 – The specified printer driver is currently in use
Windows XP/7/8/10 – The spool file was not found
Windows XP/7/8/10 – A StartDocPrinter call was not issued
Windows XP/7/8/10 – An AddJob call was not issued
Windows XP/7/8/10 – The specified print processor has already been installed
Windows XP/7/8/10 – The specified print monitor has already been installed
Windows XP/7/8/10 – The specified print monitor does not have the required functions
Windows XP/7/8/10 – The specified print monitor is currently in use
Windows XP/7/8/10 – The requested operation is not allowed when there are jobs queued to the printer
Windows XP/7/8/10 – The requested operation is successful. Changes will not be effective until the system is rebooted
Windows XP/7/8/10 – The requested operation is successful. Changes will not be effective until the service is restarted
Windows XP/7/8/10 – No printers were found
Windows XP/7/8/10 – The printer driver is known to be unreliable
Windows XP/7/8/10 – The printer driver is known to harm the system
Windows XP/7/8/10 – The specified printer driver package is currently in use
Windows XP/7/8/10 – Unable to find a core driver package that is required by the printer driver package
Windows XP/7/8/10 – The requested operation failed. A system reboot is required to roll back changes made
Windows XP/7/8/10 – The requested operation failed. A system reboot has been initiated to roll back changes made
Windows XP/7/8/10 – The specified printer driver was not found on the system and needs to be downloaded
Windows XP/7/8/10 – The requested print job has failed to print. A print system update requires the job to be resubmitted
Windows XP/7/8/10 – Reissue the given operation as a cached IO operatio
Windows XP/7/8/10 – WINS encountered an error while processing the command
Windows XP/7/8/10 – The local WINS cannot be deleted
Windows XP/7/8/10 – The importation from the file failed
Windows XP/7/8/10 – The backup failed. Was a full backup done before
Windows XP/7/8/10 – The backup failed. Check the directory to which you are backing the database
Windows XP/7/8/10 – The name does not exist in the WINS database
Windows XP/7/8/10 – Replication with a nonconfigured partner is not allowed
Windows XP/7/8/10 – The version of the supplied content information is not supported
Windows XP/7/8/10 – The supplied content information is malformed
Windows XP/7/8/10 – The requested data cannot be found in local or peer caches
Windows XP/7/8/10 – No more data is available or required
Windows XP/7/8/10 – The supplied object has not been initialized
Windows XP/7/8/10 – The supplied object has already been initialized
Windows XP/7/8/10 – A shutdown operation is already in progress
Windows XP/7/8/10 – The supplied object has already been invalidated
Windows XP/7/8/10 – An element already exists and was not replaced
Windows XP/7/8/10 – Can not cancel the requested operation as it has already been completed
Windows XP/7/8/10 – Can not perform the reqested operation because it has already been carried out
Windows XP/7/8/10 – An operation accessed data beyond the bounds of valid data
Windows XP/7/8/10 – The requested version is not supported
Windows XP/7/8/10 – A configuration value is invalid
Windows XP/7/8/10 – The SKU is not licensed
Windows XP/7/8/10 – PeerDist Service is still initializing and will be available shortly
Windows XP/7/8/10 – The DHCP client has obtained an IP address that is already in use on the network. The local interface will be disabled until the DHCP client can obtain a new address
Windows XP/7/8/10 – The GUID passed was not recognized as valid by a WMI data provider
Windows XP/7/8/10 – The instance name passed was not recognized as valid by a WMI data provider
Windows XP/7/8/10 – The data item ID passed was not recognized as valid by a WMI data provider
Windows XP/7/8/10 – The WMI request could not be completed and should be retried
Windows XP/7/8/10 – The WMI data provider could not be located
Windows XP/7/8/10 – The WMI data provider references an instance set that has not been registered
Windows XP/7/8/10 – The WMI data block or event notification has already been enabled
Windows XP/7/8/10 – The WMI data block is no longer available
Windows XP/7/8/10 – The WMI data service is not available
Windows XP/7/8/10 – The WMI data provider failed to carry out the request
Windows XP/7/8/10 – The WMI MOF information is not valid
Windows XP/7/8/10 – The WMI registration information is not valid
Windows XP/7/8/10 – The WMI data block or event notification has already been disabled
Windows XP/7/8/10 – The WMI data item or data block is read only
Windows XP/7/8/10 – The WMI data item or data block could not be changed
Windows XP/7/8/10 – The media identifier does not represent a valid medium
Windows XP/7/8/10 – The library identifier does not represent a valid library
Windows XP/7/8/10 – The media pool identifier does not represent a valid media pool
Windows XP/7/8/10 – The drive and medium are not compatible or exist in different libraries
Windows XP/7/8/10 – The medium currently exists in an offline library and must be online to perform this operation
Windows XP/7/8/10 – The operation cannot be performed on an offline library
Windows XP/7/8/10 – The library, drive, or media pool is empty
Windows XP/7/8/10 – The library, drive, or media pool must be empty to perform this operation
Windows XP/7/8/10 – No media is currently available in this media pool or library
Windows XP/7/8/10 – A resource required for this operation is disabled
Windows XP/7/8/10 – The media identifier does not represent a valid cleaner
Windows XP/7/8/10 – The drive cannot be cleaned or does not support cleaning
Windows XP/7/8/10 – The object identifier does not represent a valid object
Windows XP/7/8/10 – Unable to read from or write to the database
Windows XP/7/8/10 – The database is full
Windows XP/7/8/10 – The medium is not compatible with the device or media pool
Windows XP/7/8/10 – The resource required for this operation does not exist
Windows XP/7/8/10 – The operation identifier is not valid
Windows XP/7/8/10 – The media is not mounted or ready for use
Windows XP/7/8/10 – The device is not ready for use
Windows XP/7/8/10 – The operator or administrator has refused the request
Windows XP/7/8/10 – The drive identifier does not represent a valid drive
Windows XP/7/8/10 – Library is full. No slot is available for use
Windows XP/7/8/10 – The transport cannot access the medium
Windows XP/7/8/10 – Unable to load the medium into the drive
Windows XP/7/8/10 – Unable to retrieve the drive status
Windows XP/7/8/10 – Unable to retrieve the slot status
Windows XP/7/8/10 – Unable to retrieve status about the transport
Windows XP/7/8/10 – Cannot use the transport because it is already in use
Windows XP/7/8/10 – Unable to open or close the inject/eject port
Windows XP/7/8/10 – Unable to eject the medium because it is in a drive
Windows XP/7/8/10 – A cleaner slot is already reserved
Windows XP/7/8/10 – A cleaner slot is not reserved
Windows XP/7/8/10 – The cleaner cartridge has performed the maximum number of drive cleanings
Windows XP/7/8/10 – Unexpected on-medium identifier
Windows XP/7/8/10 – The last remaining item in this group or resource cannot be deleted
Windows XP/7/8/10 – The message provided exceeds the maximum size allowed for this parameter
Windows XP/7/8/10 – The volume contains system or paging files
Windows XP/7/8/10 – The media type cannot be removed from this library since at least one drive in the library reports it can support this media type
Windows XP/7/8/10 – This offline media cannot be mounted on this system since no enabled drives are present which can be used
Windows XP/7/8/10 – A cleaner cartridge is present in the tape library
Windows XP/7/8/10 – Cannot use the inject/eject port because it is not empty
Windows XP/7/8/10 – This file is currently not available for use on this computer
Windows XP/7/8/10 – The remote storage service is not operational at this time
Windows XP/7/8/10 – The remote storage service encountered a media error
Windows XP/7/8/10 – The file or directory is not a reparse point
Windows XP/7/8/10 – The reparse point attribute cannot be set because it conflicts with an existing attribute
Windows XP/7/8/10 – The data present in the reparse point buffer is invalid
Windows XP/7/8/10 – The tag present in the reparse point buffer is invalid
Windows XP/7/8/10 – There is a mismatch between the tag specified in the request and the tag present in the reparse point
Windows XP/7/8/10 – Single Instance Storage is not available on this volume
Windows XP/7/8/10 – The operation cannot be completed because other resources are dependent on this resource
Windows XP/7/8/10 – The cluster resource dependency cannot be found
Windows XP/7/8/10 – The cluster resource cannot be made dependent on the specified resource because it is already dependent
Windows XP/7/8/10 – The cluster resource is not online
Windows XP/7/8/10 – A cluster node is not available for this operation
Windows XP/7/8/10 – The cluster resource is not available
Windows XP/7/8/10 – The cluster resource could not be found
Windows XP/7/8/10 – The cluster is being shut down
Windows XP/7/8/10 – A cluster node cannot be evicted from the cluster unless the node is down or it is the last node
Windows XP/7/8/10 – The object already exists
Windows XP/7/8/10 – The object is already in the list
Windows XP/7/8/10 – The cluster group is not available for any new requests
Windows XP/7/8/10 – The cluster group could not be found
Windows XP/7/8/10 – The operation could not be completed because the cluster group is not online
Windows XP/7/8/10 – The operation failed because either the specified cluster node is not the owner of the resource, or the node is not a possible owner of the resource
Windows XP/7/8/10 – The operation failed because either the specified cluster node is not the owner of the group, or the node is not a possible owner of the group
Windows XP/7/8/10 – The cluster resource could not be created in the specified resource monitor
Windows XP/7/8/10 – The cluster resource could not be brought online by the resource monitor
Windows XP/7/8/10 – The operation could not be completed because the cluster resource is online
Windows XP/7/8/10 – The cluster resource could not be deleted or brought offline because it is the quorum resource
Windows XP/7/8/10 – The cluster could not make the specified resource a quorum resource because it is not capable of being a quorum resource
Windows XP/7/8/10 – The cluster software is shutting down
Windows XP/7/8/10 – The group or resource is not in the correct state to perform the requested operation
Windows XP/7/8/10 – The properties were stored but not all changes will take effect until the next time the resource is brought online
Windows XP/7/8/10 – The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class
Windows XP/7/8/10 – The cluster resource could not be deleted since it is a core resource
Windows XP/7/8/10 – The quorum resource failed to come online
Windows XP/7/8/10 – The quorum log could not be created or mounted successfully
Windows XP/7/8/10 – The cluster log is corrupt
Windows XP/7/8/10 – The record could not be written to the cluster log since it exceeds the maximum size
Windows XP/7/8/10 – The cluster log exceeds its maximum size
Windows XP/7/8/10 – No checkpoint record was found in the cluster log
Windows XP/7/8/10 – The minimum required disk space needed for logging is not available
Windows XP/7/8/10 – The cluster node failed to take control of the quorum resource because the resource is owned by another active node
Windows XP/7/8/10 – A cluster network is not available for this operation
Windows XP/7/8/10 – A cluster node is not available for this operation
Windows XP/7/8/10 – All cluster nodes must be running to perform this operation
Windows XP/7/8/10 – A cluster resource failed
Windows XP/7/8/10 – The cluster node is not valid
Windows XP/7/8/10 – The cluster node already exists
Windows XP/7/8/10 – A node is in the process of joining the cluster
Windows XP/7/8/10 – The cluster node was not found
Windows XP/7/8/10 – The cluster local node information was not found
Windows XP/7/8/10 – The cluster network already exists
Windows XP/7/8/10 – The cluster network was not found
Windows XP/7/8/10 – The cluster network interface already exists
Windows XP/7/8/10 – The cluster network interface was not found
Windows XP/7/8/10 – The cluster request is not valid for this object
Windows XP/7/8/10 – The cluster network provider is not valid
Windows XP/7/8/10 – The cluster node is down
Windows XP/7/8/10 – The cluster node is not reachable
Windows XP/7/8/10 – The cluster node is not a member of the cluster
Windows XP/7/8/10 – A cluster join operation is not in progress
Windows XP/7/8/10 – The cluster network is not valid
Windows XP/7/8/10 – The cluster node is up
Windows XP/7/8/10 – The cluster IP address is already in use
Windows XP/7/8/10 – The cluster node is not paused
Windows XP/7/8/10 – No cluster security context is available
Windows XP/7/8/10 – The cluster network is not configured for internal cluster communication
Windows XP/7/8/10 – The cluster node is already up
Windows XP/7/8/10 – The cluster node is already down
Windows XP/7/8/10 – The cluster network is already online
Windows XP/7/8/10 – The cluster network is already offline
Windows XP/7/8/10 – The cluster node is already a member of the cluster
Windows XP/7/8/10 – The cluster network is the only one configured for internal cluster communication between two or more active cluster nodes. The internal communication capability cannot be removed from the network
Windows XP/7/8/10 – One or more cluster resources depend on the network to provide service to clients. The client access capability cannot be removed from the network
Windows XP/7/8/10 – This operation cannot be performed on the cluster resource as it the quorum resource. You may not bring the quorum resource offline or modify its possible owners list
Windows XP/7/8/10 – The cluster quorum resource is not allowed to have any dependencies
Windows XP/7/8/10 – The cluster node is paused
Windows XP/7/8/10 – The cluster resource cannot be brought online. The owner node cannot run this resource
Windows XP/7/8/10 – The cluster node is not ready to perform the requested operation
Windows XP/7/8/10 – The cluster node is shutting down
Windows XP/7/8/10 – The cluster join operation was aborted
Windows XP/7/8/10 – The cluster join operation failed due to incompatible software versions between the joining node and its sponsor
Windows XP/7/8/10 – This resource cannot be created because the cluster has reached the limit on the number of resources it can monitor
Windows XP/7/8/10 – The system configuration changed during the cluster join or form operation. The join or form operation was aborted
Windows XP/7/8/10 – The specified resource type was not found
Windows XP/7/8/10 – The specified node does not support a resource of this type. This may be due to version inconsistencies or due to the absence of the resource DLL on this node
Windows XP/7/8/10 – The specified resource name is not supported by this resource DLL. This may be due to a bad (or changed) name supplied to the resource DLL
Windows XP/7/8/10 – No authentication package could be registered with the RPC server
Windows XP/7/8/10 – You cannot bring the group online because the owner of the group is not in the preferred list for the group. To change the owner node for the group, move the group
Windows XP/7/8/10 – The join operation failed because the cluster database sequence number has changed or is incompatible with the locker node. This may happen during a join operation if the cluster database was changing during the join
Windows XP/7/8/10 – The resource monitor will not allow the fail operation to be performed while the resource is in its current state. This may happen if the resource is in a pending state
Windows XP/7/8/10 – A non locker code got a request to reserve the lock for making global updates
Windows XP/7/8/10 – The quorum disk could not be located by the cluster service
Windows XP/7/8/10 – The backed up cluster database is possibly corrupt
Windows XP/7/8/10 – A DFS root already exists in this cluster node
Windows XP/7/8/10 – An attempt to modify a resource property failed because it conflicts with another existing property
Windows XP/7/8/10 – An operation was attempted that is incompatible with the current membership state of the node
Windows XP/7/8/10 – The quorum resource does not contain the quorum log
Windows XP/7/8/10 – The membership engine requested shutdown of the cluster service on this node
Windows XP/7/8/10 – The join operation failed because the cluster instance ID of the joining node does not match the cluster instance ID of the sponsor node
Windows XP/7/8/10 – A matching cluster network for the specified IP address could not be found
Windows XP/7/8/10 – The actual data type of the property did not match the expected data type of the property
Windows XP/7/8/10 – The cluster node was evicted from the cluster successfully, but the node was not cleaned up. To determine what cleanup steps failed and how to recover, see the Failover Clustering application event log using Event Viewer
Windows XP/7/8/10 – Two or more parameter values specified for a resource’s properties are in conflict
Windows XP/7/8/10 – This computer cannot be made a member of a cluster
Windows XP/7/8/10 – This computer cannot be made a member of a cluster because it does not have the correct version of Windows installed
Windows XP/7/8/10 – A cluster cannot be created with the specified cluster name because that cluster name is already in use. Specify a different name for the cluster
Windows XP/7/8/10 – The cluster configuration action has already been committed
Windows XP/7/8/10 – The cluster configuration action could not be rolled back
Windows XP/7/8/10 – The drive letter assigned to a system disk on one node conflicted with the drive letter assigned to a disk on another node
Windows XP/7/8/10 – One or more nodes in the cluster are running a version of Windows that does not support this operation
Windows XP/7/8/10 – The name of the corresponding computer account doesn’t match the Network Name for this resource
Windows XP/7/8/10 – No network adapters are available
Windows XP/7/8/10 – The cluster node has been poisoned
Windows XP/7/8/10 – The group is unable to accept the request since it is moving to another node
Windows XP/7/8/10 – The resource type cannot accept the request since is too busy performing another operation
Windows XP/7/8/10 – The call to the cluster resource DLL timed out
Windows XP/7/8/10 – The address is not valid for an IPv6 Address resource. A global IPv6 address is required, and it must match a cluster network. Compatibility addresses are not permitted
Windows XP/7/8/10 – An internal cluster error occurred. A call to an invalid function was attempted
Windows XP/7/8/10 – A parameter value is out of acceptable range
Windows XP/7/8/10 – A network error occurred while sending data to another node in the cluster. The number of bytes transmitted was less than required
Windows XP/7/8/10 – An invalid cluster registry operation was attempted
Windows XP/7/8/10 – An input string of characters is not properly terminated
Windows XP/7/8/10 – An input string of characters is not in a valid format for the data it represents
Windows XP/7/8/10 – An internal cluster error occurred. A cluster database transaction was attempted while a transaction was already in progress
Windows XP/7/8/10 – An internal cluster error occurred. There was an attempt to commit a cluster database transaction while no transaction was in progress
Windows XP/7/8/10 – An internal cluster error occurred. Data was not properly initialized
Windows XP/7/8/10 – An error occurred while reading from a stream of data. An unexpected number of bytes was returned
Windows XP/7/8/10 – An error occurred while writing to a stream of data. The required number of bytes could not be written
Windows XP/7/8/10 – An error occurred while deserializing a stream of cluster data
Windows XP/7/8/10 – One or more property values for this resource are in conflict with one or more property values associated with its dependent resource(s)
Windows XP/7/8/10 – A quorum of cluster nodes was not present to form a cluster
Windows XP/7/8/10 – The cluster network is not valid for an IPv6 Address resource, or it does not match the configured address
Windows XP/7/8/10 – The cluster network is not valid for an IPv6 Tunnel resource. Check the configuration of the IP Address resource on which the IPv6 Tunnel resource depends
Windows XP/7/8/10 – Quorum resource cannot reside in the Available Storage group
Windows XP/7/8/10 – The dependencies for this resource are nested too deeply
Windows XP/7/8/10 – The call into the resource DLL raised an unhandled exception
Windows XP/7/8/10 – The RHS process failed to initialize
Windows XP/7/8/10 – The Failover Clustering feature is not installed on this node
Windows XP/7/8/10 – The resources must be online on the same node for this operatio
Windows XP/7/8/10 – A new node can not be added since this cluster is already at its maximum number of nodes
Windows XP/7/8/10 – This cluster can not be created since the specified number of nodes exceeds the maximum allowed limit
Windows XP/7/8/10 – An attempt to use the specified cluster name failed because an enabled computer object with the given name already exists in the domain
Windows XP/7/8/10 – This cluster cannot be destroyed. It has non-core application groups which must be deleted before the cluster can be destroyed
Windows XP/7/8/10 – File share associated with file share witness resource cannot be hosted by this cluster or any of its nodes
Windows XP/7/8/10 – Eviction of this node is invalid at this time. Due to quorum requirements node eviction will result in cluster shutdown. If it is the last node in the cluster, destroy cluster command should be used
Windows XP/7/8/10 – Only one instance of this resource type is allowed in the cluster
Windows XP/7/8/10 – Only one instance of this resource type is allowed per resource group
Windows XP/7/8/10 – The resource failed to come online due to the failure of one or more provider resources
Windows XP/7/8/10 – The resource has indicated that it cannot come online on any node
Windows XP/7/8/10 – The current operation cannot be performed on this group at this time
Windows XP/7/8/10 – The directory or file is not located on a cluster shared volume
Windows XP/7/8/10 – The Security Descriptor does not meet the requirements for a cluster
Windows XP/7/8/10 – There is one or more shared volumes resources configured in the cluster. Those resources must be moved to available storage in order for operation to succeed
Windows XP/7/8/10 – This group or resource cannot be directly manipulated. Use shared volume APIs to perform desired operation
Windows XP/7/8/10 – Back up is in progress. Please wait for backup completion before trying this operation again
Windows XP/7/8/10 – The path does not belong to a cluster shared volume
Windows XP/7/8/10 – The cluster shared volume is not locally mounted on this node
Windows XP/7/8/10 – The cluster watchdog is terminating
Windows XP/7/8/10 – The specified file could not be encrypted
Windows XP/7/8/10 – The specified file could not be decrypted
Windows XP/7/8/10 – The specified file is encrypted and the user does not have the ability to decrypt it
Windows XP/7/8/10 – There is no valid encryption recovery policy configured for this system
Windows XP/7/8/10 – The required encryption driver is not loaded for this system
Windows XP/7/8/10 – The file was encrypted with a different encryption driver than is currently loaded
Windows XP/7/8/10 – There are no EFS keys defined for the user
Windows XP/7/8/10 – The specified file is not encrypted
Windows XP/7/8/10 – The specified file is not in the defined EFS export format
Windows XP/7/8/10 – The specified file is read only
Windows XP/7/8/10 – The directory has been disabled for encryption
Windows XP/7/8/10 – The server is not trusted for remote encryption operation
Windows XP/7/8/10 – Recovery policy configured for this system contains invalid recovery certificate
Windows XP/7/8/10 – The encryption algorithm used on the source file needs a bigger key buffer than the one on the destination file
Windows XP/7/8/10 – The disk partition does not support file encryption
Windows XP/7/8/10 – This machine is disabled for file encryption
Windows XP/7/8/10 – A newer system is required to decrypt this encrypted file
Windows XP/7/8/10 – The remote server sent an invalid response for a file being opened with Client Side Encryption
Windows XP/7/8/10 – Client Side Encryption is not supported by the remote server even though it claims to support it
Windows XP/7/8/10 – File is encrypted and should be opened in Client Side Encryption mode
Windows XP/7/8/10 – A new encrypted file is being created and a $EFS needs to be provided
Windows XP/7/8/10 – The SMB client requested a CSE FSCTL on a non-CSE file
Windows XP/7/8/10 – The requested operation was blocked by policy. For more information, contact your system administrator
Windows XP/7/8/10 – The list of servers for this workgroup is not currently availabl
Windows XP/7/8/10 – The Task Scheduler service must be configured to run in the System account to function properly. Individual tasks may be configured to run in other accounts
Windows XP/7/8/10 – Log service encountered an invalid log sector
Windows XP/7/8/10 – Log service encountered a log sector with invalid block parity
Windows XP/7/8/10 – Log service encountered a remapped log sector
Windows XP/7/8/10 – Log service encountered a partial or incomplete log block
Windows XP/7/8/10 – Log service encountered an attempt access data outside the active log range
Windows XP/7/8/10 – Log service user marshalling buffers are exhausted
Windows XP/7/8/10 – Log service encountered an attempt read from a marshalling area with an invalid read context
Windows XP/7/8/10 – Log service encountered an invalid log restart area
Windows XP/7/8/10 – Log service encountered an invalid log block version
Windows XP/7/8/10 – Log service encountered an invalid log block
Windows XP/7/8/10 – Log service encountered an attempt to read the log with an invalid read mode
Windows XP/7/8/10 – Log service encountered a log stream with no restart area
Windows XP/7/8/10 – Log service encountered a corrupted metadata file
Windows XP/7/8/10 – Log service encountered a metadata file that could not be created by the log file system
Windows XP/7/8/10 – Log service encountered a metadata file with inconsistent data
Windows XP/7/8/10 – Log service encountered an attempt to erroneous allocate or dispose reservation space
Windows XP/7/8/10 – Log service cannot delete log file or file system container
Windows XP/7/8/10 – Log service has reached the maximum allowable containers allocated to a log file
Windows XP/7/8/10 – Log service has attempted to read or write backward past the start of the log
Windows XP/7/8/10 – Log policy could not be installed because a policy of the same type is already present
Windows XP/7/8/10 – Log policy in question was not installed at the time of the request
Windows XP/7/8/10 – The installed set of policies on the log is invalid
Windows XP/7/8/10 – A policy on the log in question prevented the operation from completing
Windows XP/7/8/10 – Log space cannot be reclaimed because the log is pinned by the archive tail
Windows XP/7/8/10 – Log record is not a record in the log file
Windows XP/7/8/10 – Number of reserved log records or the adjustment of the number of reserved log records is invalid
Windows XP/7/8/10 – Reserved log space or the adjustment of the log space is invalid
Windows XP/7/8/10 – An new or existing archive tail or base of the active log is invalid
Windows XP/7/8/10 – Log space is exhausted
Windows XP/7/8/10 – The log could not be set to the requested size
Windows XP/7/8/10 – Log is multiplexed, no direct writes to the physical log is allowed
Windows XP/7/8/10 – The operation failed because the log is a dedicated log
Windows XP/7/8/10 – The operation requires an archive context
Windows XP/7/8/10 – Log archival is in progress
Windows XP/7/8/10 – The operation requires a non-ephemeral log, but the log is ephemeral
Windows XP/7/8/10 – The log must have at least two containers before it can be read from or written to
Windows XP/7/8/10 – A log client has already registered on the stream
Windows XP/7/8/10 – A log client has not been registered on the stream
Windows XP/7/8/10 – A request has already been made to handle the log full condition
Windows XP/7/8/10 – Log service encountered an error when attempting to read from a log container
Windows XP/7/8/10 – Log service encountered an error when attempting to write to a log container
Windows XP/7/8/10 – Log service encountered an error when attempting open a log container
Windows XP/7/8/10 – Log service encountered an invalid container state when attempting a requested action
Windows XP/7/8/10 – Log service is not in the correct state to perform a requested action
Windows XP/7/8/10 – Log space cannot be reclaimed because the log is pinned
Windows XP/7/8/10 – Log metadata flush failed
Windows XP/7/8/10 – Security on the log and its containers is inconsistent
Windows XP/7/8/10 – Records were appended to the log or reservation changes were made, but the log could not be flushed
Windows XP/7/8/10 – The log is pinned due to reservation consuming most of the log space. Free some reserved records to make space available
Windows XP/7/8/10 – The transaction handle associated with this operation is not valid
Windows XP/7/8/10 – The requested operation was made in the context of a transaction that is no longer active
Windows XP/7/8/10 – The requested operation is not valid on the Transaction object in its current state
Windows XP/7/8/10 – The caller has called a response API, but the response is not expected because the TM did not issue the corresponding request to the caller
Windows XP/7/8/10 – It is too late to perform the requested operation, since the Transaction has already been aborted
Windows XP/7/8/10 – It is too late to perform the requested operation, since the Transaction has already been committed
Windows XP/7/8/10 – The Transaction Manager was unable to be successfully initialized. Transacted operations are not supported
Windows XP/7/8/10 – The specified ResourceManager made no changes or updates to the resource under this transaction
Windows XP/7/8/10 – The resource manager has attempted to prepare a transaction that it has not successfully joined
Windows XP/7/8/10 – The Transaction object already has a superior enlistment, and the caller attempted an operation that would have created a new superior. Only a single superior enlistment is allow
Windows XP/7/8/10 – The RM tried to register a protocol that already exists
Windows XP/7/8/10 – The attempt to propagate the Transaction failed
Windows XP/7/8/10 – The requested propagation protocol was not registered as a CRM
Windows XP/7/8/10 – The buffer passed in to PushTransaction or PullTransaction is not in a valid format
Windows XP/7/8/10 – The current transaction context associated with the thread is not a valid handle to a transaction object
Windows XP/7/8/10 – The specified Transaction object could not be opened, because it was not found
Windows XP/7/8/10 – The specified ResourceManager object could not be opened, because it was not found
Windows XP/7/8/10 – The specified Enlistment object could not be opened, because it was not found
Windows XP/7/8/10 – The specified TransactionManager object could not be opened, because it was not found
Windows XP/7/8/10 – The object specified could not be created or opened, because its associated TransactionManager is not online. The TransactionManager must be brought fully Online by calling RecoverTransactionManager to recover to the end of its LogFile before objects in its Transaction or ResourceManager namespaces can be opened. In addition, errors in writing records to its LogFile can cause a TransactionManager to go offline
Windows XP/7/8/10 – The specified TransactionManager was unable to create the objects contained in its logfile in the Ob namespace. Therefore, the TransactionManager was unable to recover
Windows XP/7/8/10 – The call to create a superior Enlistment on this Transaction object could not be completed, because the Transaction object specified for the enlistment is a subordinate branch of the Transaction. Only the root of the Transaction can be enlisted on as a superior
Windows XP/7/8/10 – Because the associated transaction manager or resource manager has been closed, the handle is no longer valid
Windows XP/7/8/10 – The specified operation could not be performed on this Superior enlistment, because the enlistment was not created with the corresponding completion response in the NotificationMask
Windows XP/7/8/10 – The specified operation could not be performed, because the record that would be logged was too long. This can occur because of two conditions: either there are too many Enlistments on this Transaction, or the combined RecoveryInformation being logged on behalf of those Enlistments is too long
Windows XP/7/8/10 – Implicit transaction are not supported
Windows XP/7/8/10 – The kernel transaction manager had to abort or forget the transaction because it blocked forward progress
Windows XP/7/8/10 – The TransactionManager identity that was supplied did not match the one recorded in the TransactionManager’s log file
Windows XP/7/8/10 – This snapshot operation cannot continue because a transactional resource manager cannot be frozen in its current state. Please try again
Windows XP/7/8/10 – The transaction cannot be enlisted on with the specified EnlistmentMask, because the transaction has already completed the PrePrepare phase. In order to ensure correctness, the ResourceManager must switch to a write-through mode and cease caching data within this transaction. Enlisting for only subsequent transaction phases may still succeed
Windows XP/7/8/10 – The transaction does not have a superior enlistment
Windows XP/7/8/10 – The attempt to commit the Transaction completed, but it is possible that some portion of the transaction tree did not commit successfully due to heuristics. Therefore it is possible that some data modified in the transaction may not have committed, resulting in transactional inconsistency. If possible, check the consistency of the associated data
Windows XP/7/8/10 – The function attempted to use a name that is reserved for use by another transaction
Windows XP/7/8/10 – Transaction support within the specified resource manager is not started or was shut down due to an error
Windows XP/7/8/10 – The metadata of the RM has been corrupted. The RM will not function
Windows XP/7/8/10 – The specified directory does not contain a resource manager
Windows XP/7/8/10 – The remote server or share does not support transacted file operations
Windows XP/7/8/10 – The requested log size is invalid
Windows XP/7/8/10 – The object (file, stream, link) corresponding to the handle has been deleted by a Transaction Savepoint Rollback
Windows XP/7/8/10 – The specified file miniversion was not found for this transacted file open
Windows XP/7/8/10 – The specified file miniversion was found but has been invalidated. Most likely cause is a transaction savepoint rollback
Windows XP/7/8/10 – A miniversion may only be opened in the context of the transaction that created it
Windows XP/7/8/10 – It is not possible to open a miniversion with modify access
Windows XP/7/8/10 – It is not possible to create any more miniversions for this stream
Windows XP/7/8/10 – The remote server sent mismatching version number or Fid for a file opened with transactions
Windows XP/7/8/10 – The handle has been invalidated by a transaction. The most likely cause is the presence of memory mapping on a file or an open handle when the transaction ended or rolled back to savepoint
Windows XP/7/8/10 – There is no transaction metadata on the file
Windows XP/7/8/10 – The log data is corrupt
Windows XP/7/8/10 – The file can’t be recovered because there is a handle still open on it
Windows XP/7/8/10 – The transaction outcome is unavailable because the resource manager responsible for it has disconnected
Windows XP/7/8/10 – The request was rejected because the enlistment in question is not a superior enlistment
Windows XP/7/8/10 – The transactional resource manager is already consistent. Recovery is not needed
Windows XP/7/8/10 – The transactional resource manager has already been started
Windows XP/7/8/10 – The file cannot be opened transactionally, because its identity depends on the outcome of an unresolved transaction
Windows XP/7/8/10 – The operation cannot be performed because another transaction is depending on the fact that this property will not change
Windows XP/7/8/10 – The operation would involve a single file with two transactional resource managers and is therefore not allowed
Windows XP/7/8/10 – The $Txf directory must be empty for this operation to succeed
Windows XP/7/8/10 – The operation would leave a transactional resource manager in an inconsistent state and is therefore not allowed
Windows XP/7/8/10 – The operation could not be completed because the transaction manager does not have a log
Windows XP/7/8/10 – A rollback could not be scheduled because a previously scheduled rollback has already executed or been queued for execution
Windows XP/7/8/10 – The transactional metadata attribute on the file or directory is corrupt and unreadable
Windows XP/7/8/10 – The encryption operation could not be completed because a transaction is active
Windows XP/7/8/10 – This object is not allowed to be opened in a transaction
Windows XP/7/8/10 – An attempt to create space in the transactional resource manager’s log failed. The failure status has been recorded in the event log
Windows XP/7/8/10 – Memory mapping (creating a mapped section) a remote file under a transaction is not supported
Windows XP/7/8/10 – Transaction metadata is already present on this file and cannot be superseded
Windows XP/7/8/10 – A transaction scope could not be entered because the scope handler has not been initialized
Windows XP/7/8/10 – Promotion was required in order to allow the resource manager to enlist, but the transaction was set to disallow it
Windows XP/7/8/10 – This file is open for modification in an unresolved transaction and may be opened for execute only by a transacted reader
Windows XP/7/8/10 – The request to thaw frozen transactions was ignored because transactions had not previously been frozen
Windows XP/7/8/10 – Transactions cannot be frozen because a freeze is already in progress
Windows XP/7/8/10 – The target volume is not a snapshot volume. This operation is only valid on a volume mounted as a snapshot
Windows XP/7/8/10 – The savepoint operation failed because files are open on the transaction. This is not permitted
Windows XP/7/8/10 – Windows has discovered corruption in a file, and that file has since been repaired. Data loss may have occurred
Windows XP/7/8/10 – The sparse operation could not be completed because a transaction is active on the file
Windows XP/7/8/10 – The call to create a TransactionManager object failed because the Tm Identity stored in the logfile does not match the Tm Identity that was passed in as an argument
Windows XP/7/8/10 – I/O was attempted on a section object that has been floated as a result of a transaction ending. There is no valid data
Windows XP/7/8/10 – The transactional resource manager cannot currently accept transacted work due to a transient condition such as low resources
Windows XP/7/8/10 – The transactional resource manager had too many tranactions outstanding that could not be aborted. The transactional resource manger has been shut down
Windows XP/7/8/10 – The operation could not be completed due to bad clusters on disk
Windows XP/7/8/10 – The compression operation could not be completed because a transaction is active on the file
Windows XP/7/8/10 – The operation could not be completed because the volume is dirty. Please run chkdsk and try again
Windows XP/7/8/10 – The link tracking operation could not be completed because a transaction is active
Windows XP/7/8/10 – This operation cannot be performed in a transaction
Windows XP/7/8/10 – The handle is no longer properly associated with its transaction. It may have been opened in a transactional resource manager that was subsequently forced to restart. Please close the handle and open a new one
Windows XP/7/8/10 – The specified operation could not be performed because the resource manager is not enlisted in the transaction
Windows XP/7/8/10 – The specified session name is invalid
Windows XP/7/8/10 – The specified protocol driver is invalid
Windows XP/7/8/10 – The specified protocol driver was not found in the system path
Windows XP/7/8/10 – The specified terminal connection driver was not found in the system path
Windows XP/7/8/10 – A registry key for event logging could not be created for this session
Windows XP/7/8/10 – A service with the same name already exists on the system
Windows XP/7/8/10 – A close operation is pending on the session
Windows XP/7/8/10 – There are no free output buffers available
Windows XP/7/8/10 – The MODEM.INF file was not found
Windows XP/7/8/10 – The modem name was not found in MODEM.INF
Windows XP/7/8/10 – The modem did not accept the command sent to it. Verify that the configured modem name matches the attached modem
Windows XP/7/8/10 – The modem did not respond to the command sent to it. Verify that the modem is properly cabled and powered on
Windows XP/7/8/10 – Carrier detect has failed or carrier has been dropped due to disconnect
Windows XP/7/8/10 – Dial tone not detected within the required time. Verify that the phone cable is properly attached and functional
Windows XP/7/8/10 – Busy signal detected at remote site on callback
Windows XP/7/8/10 – Voice detected at remote site on callback
Windows XP/7/8/10 – Transport driver erro
Windows XP/7/8/10 – The specified session cannot be found
Windows XP/7/8/10 – The specified session name is already in use
Windows XP/7/8/10 – The task you are trying to do can’t be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on
Windows XP/7/8/10 – An attempt has been made to connect to a session whose video mode is not supported by the current client
Windows XP/7/8/10 – The application attempted to enable DOS graphics mode. DOS graphics mode is not supported
Windows XP/7/8/10 – Your interactive logon privilege has been disabled. Please contact your administrator
Windows XP/7/8/10 – The requested operation can be performed only on the system console. This is most often the result of a driver or system DLL requiring direct console access
Windows XP/7/8/10 – The client failed to respond to the server connect message
Windows XP/7/8/10 – Disconnecting the console session is not supported
Windows XP/7/8/10 – Reconnecting a disconnected session to the console is not supported
Windows XP/7/8/10 – The request to control another session remotely was denied
Windows XP/7/8/10 – The requested session access is denied
Windows XP/7/8/10 – The specified terminal connection driver is invalid
Windows XP/7/8/10 – The requested session cannot be controlled remotely. This may be because the session is disconnected or does not currently have a user logged on
Windows XP/7/8/10 – The requested session is not configured to allow remote control
Windows XP/7/8/10 – Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number is currently being used by another user. Please call your system administrator to obtain a unique license number
Windows XP/7/8/10 – Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number has not been entered for this copy of the Terminal Server client. Please contact your system administrator
Windows XP/7/8/10 – The number of connections to this computer is limited and all connections are in use right now. Try connecting later or contact your system administrator
Windows XP/7/8/10 – The client you are using is not licensed to use this system. Your logon request is denied
Windows XP/7/8/10 – The system license has expired. Your logon request is denied
Windows XP/7/8/10 – Remote control could not be terminated because the specified session is not currently being remotely controlled
Windows XP/7/8/10 – The remote control of the console was terminated because the display mode was changed. Changing the display mode in a remote control session is not supported
Windows XP/7/8/10 – Activation has already been reset the maximum number of times for this installation. Your activation timer will not be cleared
Windows XP/7/8/10 – Remote logins are currently disabled
Windows XP/7/8/10 – You do not have the proper encryption level to access this Session
Windows XP/7/8/10 – The user %s\\%s is currently logged on to this computer. Only the current user or an administrator can log on to this computer
Windows XP/7/8/10 – The user %s\\%s is already logged on to the console of this computer. You do not have permission to log in at this time. To resolve this issue, contact %s\\%s and have them log off
Windows XP/7/8/10 – Unable to log you on because of an account restriction
Windows XP/7/8/10 – The RDP protocol component %2 detected an error in the protocol stream and has disconnected the client
Windows XP/7/8/10 – The Client Drive Mapping Service Has Connected on Terminal Connection
Windows XP/7/8/10 – The Client Drive Mapping Service Has Disconnected on Terminal Connection
Windows XP/7/8/10 – The Terminal Server security layer detected an error in the protocol stream and has disconnected the client
Windows XP/7/8/10 – The target session is incompatible with the current session
Windows XP/7/8/10 – Windows can’t connect to your session because a problem occurred in the Windows video subsystem. Try connecting again later, or contact the server administrator for assistance
Windows XP/7/8/10 – The file replication service API was called incorrectly
Windows XP/7/8/10 – The file replication service cannot be started
Windows XP/7/8/10 – The file replication service cannot be stopped
Windows XP/7/8/10 – The file replication service API terminated the request. The event log may have more information
Windows XP/7/8/10 – The file replication service terminated the request. The event log may have more information
Windows XP/7/8/10 – The file replication service cannot be contacted. The event log may have more information
Windows XP/7/8/10 – The file replication service cannot satisfy the request because the user has insufficient privileges. The event log may have more information
Windows XP/7/8/10 – The file replication service cannot satisfy the request because authenticated RPC is not available. The event log may have more information
Windows XP/7/8/10 – The file replication service cannot satisfy the request because the user has insufficient privileges on the domain controller. The event log may have more information
Windows XP/7/8/10 – The file replication service cannot satisfy the request because authenticated RPC is not available on the domain controller. The event log may have more information
Windows XP/7/8/10 – The file replication service cannot communicate with the file replication service on the domain controller. The event log may have more information
Windows XP/7/8/10 – The file replication service on the domain controller cannot communicate with the file replication service on this computer. The event log may have more information
Windows XP/7/8/10 – The file replication service cannot populate the system volume because of an internal error. The event log may have more information
Windows XP/7/8/10 – The file replication service cannot populate the system volume because of an internal timeout. The event log may have more information
Windows XP/7/8/10 – The file replication service cannot process the request. The system volume is busy with a previous request
Windows XP/7/8/10 – The file replication service cannot stop replicating the system volume because of an internal error. The event log may have more information
Windows XP/7/8/10 – The file replication service detected an invalid parameter
Windows XP/7/8/10 – An error occurred while installing the directory service. For more information, see the event log
Windows XP/7/8/10 – The directory service evaluated group memberships locally
Windows XP/7/8/10 – The specified directory service attribute or value does not exist
Windows XP/7/8/10 – The attribute syntax specified to the directory service is invalid
Windows XP/7/8/10 – The attribute type specified to the directory service is not defined
Windows XP/7/8/10 – The specified directory service attribute or value already exists
Windows XP/7/8/10 – The directory service is busy
Windows XP/7/8/10 – The directory service is unavailable
Windows XP/7/8/10 – The directory service was unable to allocate a relative identifier
Windows XP/7/8/10 – The directory service has exhausted the pool of relative identifiers
Windows XP/7/8/10 – The requested operation could not be performed because the directory service is not the master for that type of operation
Windows XP/7/8/10 – The directory service was unable to initialize the subsystem that allocates relative identifiers
Windows XP/7/8/10 – The requested operation did not satisfy one or more constraints associated with the class of the object
Windows XP/7/8/10 – The directory service can perform the requested operation only on a leaf object
Windows XP/7/8/10 – The directory service cannot perform the requested operation on the RDN attribute of an object
Windows XP/7/8/10 – The directory service detected an attempt to modify the object class of an object
Windows XP/7/8/10 – The requested cross-domain move operation could not be performed
Windows XP/7/8/10 – Unable to contact the global catalog server
Windows XP/7/8/10 – The policy object is shared and can only be modified at the root
Windows XP/7/8/10 – The policy object does not exist
Windows XP/7/8/10 – The requested policy information is only in the directory service
Windows XP/7/8/10 – A domain controller promotion is currently active
Windows XP/7/8/10 – A domain controller promotion is not currently activ
Windows XP/7/8/10 – An operations error occurred
Windows XP/7/8/10 – A protocol error occurred
Windows XP/7/8/10 – The time limit for this request was exceeded
Windows XP/7/8/10 – The size limit for this request was exceeded
Windows XP/7/8/10 – The administrative limit for this request was exceeded
Windows XP/7/8/10 – The compare response was false
Windows XP/7/8/10 – The compare response was true
Windows XP/7/8/10 – The requested authentication method is not supported by the server
Windows XP/7/8/10 – A more secure authentication method is required for this server
Windows XP/7/8/10 – Inappropriate authentication
Windows XP/7/8/10 – The authentication mechanism is unknown
Windows XP/7/8/10 – A referral was returned from the server
Windows XP/7/8/10 – The server does not support the requested critical extension
Windows XP/7/8/10 – This request requires a secure connection
Windows XP/7/8/10 – Inappropriate matching
Windows XP/7/8/10 – A constraint violation occurred
Windows XP/7/8/10 – There is no such object on the server
Windows XP/7/8/10 – There is an alias problem
Windows XP/7/8/10 – An invalid dn syntax has been specified
Windows XP/7/8/10 – The object is a leaf object
Windows XP/7/8/10 – There is an alias dereferencing problem
Windows XP/7/8/10 – The server is unwilling to process the request
Windows XP/7/8/10 – A loop has been detected
Windows XP/7/8/10 – There is a naming violation
Windows XP/7/8/10 – The result set is too large
Windows XP/7/8/10 – The operation affects multiple DSA
Windows XP/7/8/10 – The server is not operational
Windows XP/7/8/10 – A local error has occurred
Windows XP/7/8/10 – An encoding error has occurred
Windows XP/7/8/10 – A decoding error has occurred
Windows XP/7/8/10 – The search filter cannot be recognized
Windows XP/7/8/10 – One or more parameters are illegal
Windows XP/7/8/10 – The specified method is not supported
Windows XP/7/8/10 – No results were returned
Windows XP/7/8/10 – The specified control is not supported by the server
Windows XP/7/8/10 – A referral loop was detected by the client
Windows XP/7/8/10 – The preset referral limit was exceeded
Windows XP/7/8/10 – The search requires a SORT control
Windows XP/7/8/10 – The search results exceed the offset range specified
Windows XP/7/8/10 – The root object must be the head of a naming context. The root object cannot have an instantiated parent
Windows XP/7/8/10 – The add replica operation cannot be performed. The naming context must be writeable in order to create the replica
Windows XP/7/8/10 – A reference to an attribute that is not defined in the schema occurred
Windows XP/7/8/10 – The maximum size of an object has been exceeded
Windows XP/7/8/10 – An attempt was made to add an object to the directory with a name that is already in use
Windows XP/7/8/10 – An attempt was made to add an object of a class that does not have an RDN defined in the schema
Windows XP/7/8/10 – An attempt was made to add an object using an RDN that is not the RDN defined in the schema
Windows XP/7/8/10 – None of the requested attributes were found on the objects
Windows XP/7/8/10 – The user buffer is too small
Windows XP/7/8/10 – The attribute specified in the operation is not present on the object
Windows XP/7/8/10 – Illegal modify operation. Some aspect of the modification is not permitted
Windows XP/7/8/10 – The specified object is too large
Windows XP/7/8/10 – The specified instance type is not valid
Windows XP/7/8/10 – The operation must be performed at a master DSA
Windows XP/7/8/10 – The object class attribute must be specified
Windows XP/7/8/10 – A required attribute is missing
Windows XP/7/8/10 – An attempt was made to modify an object to include an attribute that is not legal for its class
Windows XP/7/8/10 – The specified attribute is already present on the object
Windows XP/7/8/10 – The specified attribute is not present, or has no values
Windows XP/7/8/10 – Multiple values were specified for an attribute that can have only one value
Windows XP/7/8/10 – A value for the attribute was not in the acceptable range of values
Windows XP/7/8/10 – The specified value already exists
Windows XP/7/8/10 – The attribute cannot be removed because it is not present on the object
Windows XP/7/8/10 – The attribute value cannot be removed because it is not present on the object
Windows XP/7/8/10 – The specified root object cannot be a subref
Windows XP/7/8/10 – Chaining is not permitted
Windows XP/7/8/10 – Chained evaluation is not permitted
Windows XP/7/8/10 – The operation could not be performed because the object’s parent is either uninstantiated or deleted
Windows XP/7/8/10 – Having a parent that is an alias is not permitted. Aliases are leaf objects
Windows XP/7/8/10 – The object and parent must be of the same type, either both masters or both replicas
Windows XP/7/8/10 – The operation cannot be performed because child objects exist. This operation can only be performed on a leaf object
Windows XP/7/8/10 – Directory object not found
Windows XP/7/8/10 – The aliased object is missing
Windows XP/7/8/10 – The object name has bad syntax
Windows XP/7/8/10 – It is not permitted for an alias to refer to another alias
Windows XP/7/8/10 – The alias cannot be dereferenced
Windows XP/7/8/10 – The operation is out of scope
Windows XP/7/8/10 – The operation cannot continue because the object is in the process of being removed
Windows XP/7/8/10 – The DSA object cannot be deleted
Windows XP/7/8/10 – A directory service error has occurred
Windows XP/7/8/10 – The operation can only be performed on an internal master DSA object
Windows XP/7/8/10 – The object must be of class DSA
Windows XP/7/8/10 – Insufficient access rights to perform the operation
Windows XP/7/8/10 – The object cannot be added because the parent is not on the list of possible superiors
Windows XP/7/8/10 – Access to the attribute is not permitted because the attribute is owned by the Security Accounts Manager (SAM)
Windows XP/7/8/10 – The name has too many parts
Windows XP/7/8/10 – The name is too long
Windows XP/7/8/10 – The name value is too long
Windows XP/7/8/10 – The directory service encountered an error parsing a name
Windows XP/7/8/10 – The directory service cannot get the attribute type for a name
Windows XP/7/8/10 – The name does not identify an object; the name identifies a phantom
Windows XP/7/8/10 – The security descriptor is too short
Windows XP/7/8/10 – The security descriptor is invalid
Windows XP/7/8/10 – Failed to create name for deleted object
Windows XP/7/8/10 – The parent of a new subref must exist
Windows XP/7/8/10 – The object must be a naming context
Windows XP/7/8/10 – It is not permitted to add an attribute which is owned by the system
Windows XP/7/8/10 – The class of the object must be structural; you cannot instantiate an abstract class
Windows XP/7/8/10 – The schema object could not be found
Windows XP/7/8/10 – A local object with this GUID (dead or alive) already exists
Windows XP/7/8/10 – The operation cannot be performed on a back link
Windows XP/7/8/10 – The cross reference for the specified naming context could not be found
Windows XP/7/8/10 – The operation could not be performed because the directory service is shutting down
Windows XP/7/8/10 – The directory service request is invalid
Windows XP/7/8/10 – The role owner attribute could not be read
Windows XP/7/8/10 – The requested FSMO operation failed. The current FSMO holder could not be contacted
Windows XP/7/8/10 – Modification of a DN across a naming context is not permitted
Windows XP/7/8/10 – The attribute cannot be modified because it is owned by the system
Windows XP/7/8/10 – Only the replicator can perform this function
Windows XP/7/8/10 – The specified class is not defined
Windows XP/7/8/10 – The specified class is not a subclass
Windows XP/7/8/10 – The name reference is invalid
Windows XP/7/8/10 – A cross reference already exists
Windows XP/7/8/10 – It is not permitted to delete a master cross reference
Windows XP/7/8/10 – Subtree notifications are only supported on NC heads
Windows XP/7/8/10 – Notification filter is too complex
Windows XP/7/8/10 – Schema update failed: duplicate RDN
Windows XP/7/8/10 – Schema update failed: duplicate OID
Windows XP/7/8/10 – Schema update failed: duplicate MAPI identifier
Windows XP/7/8/10 – Schema update failed: duplicate schema-id GUID
Windows XP/7/8/10 – Schema update failed: duplicate LDAP display name
Windows XP/7/8/10 – Schema update failed: range-lower less than range upper
Windows XP/7/8/10 – Schema update failed: syntax mismatch
Windows XP/7/8/10 – Schema deletion failed: attribute is used in must-contain
Windows XP/7/8/10 – Schema deletion failed: attribute is used in may-contain
Windows XP/7/8/10 – Schema update failed: attribute in may-contain does not exist
Windows XP/7/8/10 – Schema update failed: attribute in must-contain does not exist
Windows XP/7/8/10 – Schema update failed: class in aux-class list does not exist or is not an auxiliary class
Windows XP/7/8/10 – Schema update failed: class in poss-superiors does not exist
Windows XP/7/8/10 – Schema update failed: class in subclassof list does not exist or does not satisfy hierarchy rules
Windows XP/7/8/10 – Schema update failed: Rdn-Att-Id has wrong syntax
Windows XP/7/8/10 – Schema deletion failed: class is used as auxiliary class
Windows XP/7/8/10 – Schema deletion failed: class is used as sub class
Windows XP/7/8/10 – Schema deletion failed: class is used as poss superior
Windows XP/7/8/10 – Schema update failed in recalculating validation cache
Windows XP/7/8/10 – The tree deletion is not finished. The request must be made again to continue deleting the tree
Windows XP/7/8/10 – The requested delete operation could not be performed
Windows XP/7/8/10 – Cannot read the governs class identifier for the schema record
Windows XP/7/8/10 – The attribute schema has bad syntax
Windows XP/7/8/10 – The attribute could not be cached
Windows XP/7/8/10 – The class could not be cached
Windows XP/7/8/10 – The attribute could not be removed from the cache
Windows XP/7/8/10 – The class could not be removed from the cache
Windows XP/7/8/10 – The distinguished name attribute could not be read
Windows XP/7/8/10 – No superior reference has been configured for the directory service. The directory service is therefore unable to issue referrals to objects outside this forest
Windows XP/7/8/10 – The instance type attribute could not be retrieved
Windows XP/7/8/10 – An internal error has occurred
Windows XP/7/8/10 – A database error has occurred
Windows XP/7/8/10 – The attribute GOVERNSID is missing
Windows XP/7/8/10 – An expected attribute is missing
Windows XP/7/8/10 – The specified naming context is missing a cross reference
Windows XP/7/8/10 – A security checking error has occurred
Windows XP/7/8/10 – The schema is not loaded
Windows XP/7/8/10 – Schema allocation failed. Please check if the machine is running low on memory
Windows XP/7/8/10 – Failed to obtain the required syntax for the attribute schema
Windows XP/7/8/10 – The global catalog verification failed. The global catalog is not available or does not support the operation. Some part of the directory is currently not available
Windows XP/7/8/10 – The replication operation failed because of a schema mismatch between the servers involved
Windows XP/7/8/10 – The DSA object could not be found
Windows XP/7/8/10 – The naming context could not be found
Windows XP/7/8/10 – The naming context could not be found in the cache
Windows XP/7/8/10 – The child object could not be retrieved
Windows XP/7/8/10 – The modification was not permitted for security reasons
Windows XP/7/8/10 – The operation cannot replace the hidden record
Windows XP/7/8/10 – The hierarchy file is invalid
Windows XP/7/8/10 – The attempt to build the hierarchy table failed
Windows XP/7/8/10 – The directory configuration parameter is missing from the registry
Windows XP/7/8/10 – The attempt to count the address book indices failed
Windows XP/7/8/10 – The allocation of the hierarchy table failed
Windows XP/7/8/10 – The directory service encountered an internal failure
Windows XP/7/8/10 – The directory service encountered an unknown failure
Windows XP/7/8/10 – A root object requires a class of ‘top’
Windows XP/7/8/10 – This directory server is shutting down, and cannot take ownership of new floating single-master operation roles
Windows XP/7/8/10 – The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles
Windows XP/7/8/10 – The directory service was unable to transfer ownership of one or more floating single-master operation roles to other servers
Windows XP/7/8/10 – The replication operation failed
Windows XP/7/8/10 – An invalid parameter was specified for this replication operation
Windows XP/7/8/10 – The directory service is too busy to complete the replication operation at this time
Windows XP/7/8/10 – The distinguished name specified for this replication operation is invalid
Windows XP/7/8/10 – The naming context specified for this replication operation is invalid
Windows XP/7/8/10 – The distinguished name specified for this replication operation already exists
Windows XP/7/8/10 – The replication system encountered an internal error
Windows XP/7/8/10 – The replication operation encountered a database inconsistency
Windows XP/7/8/10 – The server specified for this replication operation could not be contacted
Windows XP/7/8/10 – The replication operation encountered an object with an invalid instance type
Windows XP/7/8/10 – The replication operation failed to allocate memory
Windows XP/7/8/10 – The replication operation encountered an error with the mail system
Windows XP/7/8/10 – The replication reference information for the target server already exists
Windows XP/7/8/10 – The replication reference information for the target server does not exist
Windows XP/7/8/10 – The naming context cannot be removed because it is replicated to another server
Windows XP/7/8/10 – The replication operation encountered a database error
Windows XP/7/8/10 – The naming context is in the process of being removed or is not replicated from the specified server
Windows XP/7/8/10 – Replication access was denied
Windows XP/7/8/10 – The requested operation is not supported by this version of the directory service
Windows XP/7/8/10 – The replication remote procedure call was cancelled
Windows XP/7/8/10 – The source server is currently rejecting replication requests
Windows XP/7/8/10 – The destination server is currently rejecting replication requests
Windows XP/7/8/10 – The replication operation failed due to a collision of object names
Windows XP/7/8/10 – The replication source has been reinstalled
Windows XP/7/8/10 – The replication operation failed because a required parent object is missing
Windows XP/7/8/10 – The replication operation was preempted
Windows XP/7/8/10 – The replication synchronization attempt was abandoned because of a lack of updates
Windows XP/7/8/10 – The replication operation was terminated because the system is shutting down
Windows XP/7/8/10 – Synchronization attempt failed because the destination DC is currently waiting to synchronize new partial attributes from source. This condition is normal if a recent schema change modified the partial attribute set. The destination partial attribute set is not a subset of source partial attribute set
Windows XP/7/8/10 – The replication synchronization attempt failed because a master replica attempted to sync from a partial replica
Windows XP/7/8/10 – The server specified for this replication operation was contacted, but that server was unable to contact an additional server needed to complete the operation
Windows XP/7/8/10 – The version of the directory service schema of the source forest is not compatible with the version of directory service on this computer
Windows XP/7/8/10 – Schema update failed: An attribute with the same link identifier already exists
Windows XP/7/8/10 – Name translation: Generic processing error
Windows XP/7/8/10 – Name translation: Could not find the name or insufficient right to see name
Windows XP/7/8/10 – Name translation: Input name mapped to more than one output name
Windows XP/7/8/10 – Name translation: Input name found, but not the associated output format
Windows XP/7/8/10 – Name translation: Unable to resolve completely, only the domain was found
Windows XP/7/8/10 – Name translation: Unable to perform purely syntactical mapping at the client without going out to the wire
Windows XP/7/8/10 – Modification of a constructed attribute is not allowed
Windows XP/7/8/10 – The OM-Object-Class specified is incorrect for an attribute with the specified syntax
Windows XP/7/8/10 – The replication request has been posted; waiting for reply
Windows XP/7/8/10 – The requested operation requires a directory service, and none was available
Windows XP/7/8/10 – The LDAP display name of the class or attribute contains non-ASCII characters
Windows XP/7/8/10 – The requested search operation is only supported for base searches
Windows XP/7/8/10 – The search failed to retrieve attributes from the database
Windows XP/7/8/10 – The schema update operation tried to add a backward link attribute that has no corresponding forward link
Windows XP/7/8/10 – Source and destination of a cross-domain move do not agree on the object’s epoch number. Either source or destination does not have the latest version of the object
Windows XP/7/8/10 – Source and destination of a cross-domain move do not agree on the object’s current name. Either source or destination does not have the latest version of the object
Windows XP/7/8/10 – Source and destination for the cross-domain move operation are identical. Caller should use local move operation instead of cross-domain move operation
Windows XP/7/8/10 – Source and destination for a cross-domain move are not in agreement on the naming contexts in the forest. Either source or destination does not have the latest version of the Partitions container
Windows XP/7/8/10 – Destination of a cross-domain move is not authoritative for the destination naming context
Windows XP/7/8/10 – Source and destination of a cross-domain move do not agree on the identity of the source object. Either source or destination does not have the latest version of the source object
Windows XP/7/8/10 – Object being moved across-domains is already known to be deleted by the destination server. The source server does not have the latest version of the source object
Windows XP/7/8/10 – Another operation which requires exclusive access to the PDC FSMO is already in progress
Windows XP/7/8/10 – A cross-domain move operation failed such that two versions of the moved object exist – one each in the source and destination domains. The destination object needs to be removed to restore the system to a consistent state
Windows XP/7/8/10 – This object may not be moved across domain boundaries either because cross-domain moves for this class are disallowed, or the object has some special characteristics, e.g.: trust account or restricted RID, which prevent its move
Windows XP/7/8/10 – Can’t move objects with memberships across domain boundaries as once moved, this would violate the membership conditions of the account group. Remove the object from any account group memberships and retry
Windows XP/7/8/10 – A naming context head must be the immediate child of another naming context head, not of an interior node
Windows XP/7/8/10 – The directory cannot validate the proposed naming context name because it does not hold a replica of the naming context above the proposed naming context. Please ensure that the domain naming master role is held by a server that is configured as a global catalog server, and that the server is up to date with its replication partners. (Applies only to Windows 2000 Domain Naming masters
Windows XP/7/8/10 – Destination domain must be in native mode
Windows XP/7/8/10 – The operation cannot be performed because the server does not have an infrastructure container in the domain of interest
Windows XP/7/8/10 – Cross-domain move of non-empty account groups is not allowed
Windows XP/7/8/10 – Cross-domain move of non-empty resource groups is not allowed
Windows XP/7/8/10 – The search flags for the attribute are invalid. The ANR bit is valid only on attributes of Unicode or Teletex strings
Windows XP/7/8/10 – Tree deletions starting at an object which has an NC head as a descendant are not allowed
Windows XP/7/8/10 – The directory service failed to lock a tree in preparation for a tree deletion because the tree was in use
Windows XP/7/8/10 – The directory service failed to identify the list of objects to delete while attempting a tree deletion
Windows XP/7/8/10 – Security Accounts Manager initialization failed because of the following error: %1. Error Status: 0x%2. Please shutdown this system and reboot into Directory Services Restore Mode, check the event log for more detailed information
Windows XP/7/8/10 – Only an administrator can modify the membership list of an administrative group
Windows XP/7/8/10 – Cannot change the primary group ID of a domain controller account
Windows XP/7/8/10 – An attempt is made to modify the base schema
Windows XP/7/8/10 – Adding a new mandatory attribute to an existing class, deleting a mandatory attribute from an existing class, or adding an optional attribute to the special class Top that is not a backlink attribute (directly or through inheritance, for example, by adding or deleting an auxiliary class) is not allowed
Windows XP/7/8/10 – Schema update is not allowed on this DC because the DC is not the schema FSMO Role Owner
Windows XP/7/8/10 – An object of this class cannot be created under the schema container. You can only create attribute-schema and class-schema objects under the schema container
Windows XP/7/8/10 – The replica/child install failed to get the objectVersion attribute on the schema container on the source DC. Either the attribute is missing on the schema container or the credentials supplied do not have permission to read it
Windows XP/7/8/10 – The replica/child install failed to read the objectVersion attribute in the SCHEMA section of the file schema.ini in the system32 directory
Windows XP/7/8/10 – The specified group type is invalid
Windows XP/7/8/10 – You cannot nest global groups in a mixed domain if the group is security-enabled
Windows XP/7/8/10 – You cannot nest local groups in a mixed domain if the group is security-enabled
Windows XP/7/8/10 – A global group cannot have a local group as a member
Windows XP/7/8/10 – A global group cannot have a universal group as a member
Windows XP/7/8/10 – A universal group cannot have a local group as a member
Windows XP/7/8/10 – A global group cannot have a cross-domain member
Windows XP/7/8/10 – A local group cannot have another cross domain local group as a member
Windows XP/7/8/10 – A group with primary members cannot change to a security-disabled group
Windows XP/7/8/10 – The schema cache load failed to convert the string default SD on a class-schema object
Windows XP/7/8/10 – Only DSAs configured to be Global Catalog servers should be allowed to hold the Domain Naming Master FSMO role. (Applies only to Windows 2000 servers
Windows XP/7/8/10 – The DSA operation is unable to proceed because of a DNS lookup failure
Windows XP/7/8/10 – While processing a change to the DNS Host Name for an object, the Service Principal Name values could not be kept in sync
Windows XP/7/8/10 – The Security Descriptor attribute could not be read
Windows XP/7/8/10 – The object requested was not found, but an object with that key was found
Windows XP/7/8/10 – The syntax of the linked attribute being added is incorrect. Forward links can only have syntax 2.5.5.1, 2.5.5.7, and 2.5.5.14, and backlinks can only have syntax 2.5.5.
Windows XP/7/8/10 – Security Account Manager needs to get the boot password
Windows XP/7/8/10 – Security Account Manager needs to get the boot key from floppy disk
Windows XP/7/8/10 – Directory Service cannot start
Windows XP/7/8/10 – Directory Services could not start
Windows XP/7/8/10 – The connection between client and server requires packet privacy or better
Windows XP/7/8/10 – The source domain may not be in the same forest as destination
Windows XP/7/8/10 – The destination domain must be in the forest
Windows XP/7/8/10 – The operation requires that destination domain auditing be enabled
Windows XP/7/8/10 – The operation couldn’t locate a DC for the source domain
Windows XP/7/8/10 – The source object must be a group or user
Windows XP/7/8/10 – The source object’s SID already exists in destination forest
Windows XP/7/8/10 – The source and destination object must be of the same type
Windows XP/7/8/10 – Security Accounts Manager initialization failed because of the following error: %1. Error Status: 0x%2. Click OK to shut down the system and reboot into Safe Mode. Check the event log for detailed information
Windows XP/7/8/10 – Schema information could not be included in the replication request
Windows XP/7/8/10 – The replication operation could not be completed due to a schema incompatibility
Windows XP/7/8/10 – The replication operation could not be completed due to a previous schema incompatibility
Windows XP/7/8/10 – The replication update could not be applied because either the source or the destination has not yet received information regarding a recent cross-domain move operation
Windows XP/7/8/10 – The requested domain could not be deleted because there exist domain controllers that still host this domain
Windows XP/7/8/10 – The requested operation can be performed only on a global catalog server
Windows XP/7/8/10 – A local group can only be a member of other local groups in the same domain
Windows XP/7/8/10 – Foreign security principals cannot be members of universal groups
Windows XP/7/8/10 – The attribute is not allowed to be replicated to the GC because of security reasons
Windows XP/7/8/10 – The checkpoint with the PDC could not be taken because there too many modifications being processed currently
Windows XP/7/8/10 – The operation requires that source domain auditing be enabled
Windows XP/7/8/10 – Security principal objects can only be created inside domain naming contexts
Windows XP/7/8/10 – A Service Principal Name (SPN) could not be constructed because the provided hostname is not in the necessary format
Windows XP/7/8/10 – A Filter was passed that uses constructed attributes
Windows XP/7/8/10 – The unicodePwd attribute value must be enclosed in double quotes
Windows XP/7/8/10 – Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased
Windows XP/7/8/10 – For security reasons, the operation must be run on the destination DC
Windows XP/7/8/10 – For security reasons, the source DC must be NT4SP4 or greater
Windows XP/7/8/10 – Critical Directory Service System objects cannot be deleted during tree delete operations. The tree delete may have been partially performed
Windows XP/7/8/10 – Directory Services could not start because of the following error: %1. Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the system further
Windows XP/7/8/10 – Security Accounts Manager initialization failed because of the following error: %1. Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the system further
Windows XP/7/8/10 – The version of the operating system is incompatible with the current AD DS forest functional level or AD LDS Configuration Set functional level. You must upgrade to a new version of the operating system before this server can become an AD DS Domain Controller or add an AD LDS Instance in this AD DS Forest or AD LDS Configuration Set
Windows XP/7/8/10 – The version of the operating system installed is incompatible with the current domain functional level. You must upgrade to a new version of the operating system before this server can become a domain controller in this domain
Windows XP/7/8/10 – The version of the operating system installed on this server no longer supports the current AD DS Forest functional level or AD LDS Configuration Set functional level. You must raise the AD DS Forest functional level or AD LDS Configuration Set functional level before this server can become an AD DS Domain Controller or an AD LDS Instance in this Forest or Configuration Set
Windows XP/7/8/10 – The version of the operating system installed on this server no longer supports the current domain functional level. You must raise the domain functional level before this server can become a domain controller in this domain
Windows XP/7/8/10 – The version of the operating system installed on this server is incompatible with the functional level of the domain or forest
Windows XP/7/8/10 – The functional level of the domain (or forest) cannot be raised to the requested value, because there exist one or more domain controllers in the domain (or forest) that are at a lower incompatible functional level
Windows XP/7/8/10 – The forest functional level cannot be raised to the requested value since one or more domains are still in mixed domain mode. All domains in the forest must be in native mode, for you to raise the forest functional level
Windows XP/7/8/10 – The sort order requested is not supported
Windows XP/7/8/10 – The requested name already exists as a unique identifier
Windows XP/7/8/10 – The machine account was created pre-NT4. The account needs to be recreated
Windows XP/7/8/10 – The database is out of version store
Windows XP/7/8/10 – Unable to continue operation because multiple conflicting controls were used
Windows XP/7/8/10 – Unable to find a valid security descriptor reference domain for this partition
Windows XP/7/8/10 – Schema update failed: The link identifier is reserved
Windows XP/7/8/10 – Schema update failed: There are no link identifiers available
Windows XP/7/8/10 – An account group cannot have a universal group as a member
Windows XP/7/8/10 – Rename or move operations on naming context heads or read-only objects are not allowed
Windows XP/7/8/10 – Move operations on objects in the schema naming context are not allowed
Windows XP/7/8/10 – A system flag has been set on the object and does not allow the object to be moved or renamed
Windows XP/7/8/10 – This object is not allowed to change its grandparent container. Moves are not forbidden on this object, but are restricted to sibling containers
Windows XP/7/8/10 – Unable to resolve completely, a referral to another forest is generated
Windows XP/7/8/10 – The requested action is not supported on standard server
Windows XP/7/8/10 – Could not access a partition of the directory service located on a remote server. Make sure at least one server is running for the partition in question
Windows XP/7/8/10 – The directory cannot validate the proposed naming context (or partition) name because it does not hold a replica nor can it contact a replica of the naming context above the proposed naming context. Please ensure that the parent naming context is properly registered in DNS, and at least one replica of this naming context is reachable by the Domain Naming master
Windows XP/7/8/10 – The thread limit for this request was exceeded
Windows XP/7/8/10 – The Global catalog server is not in the closest site
Windows XP/7/8/10 – The DS cannot derive a service principal name (SPN) with which to mutually authenticate the target server because the corresponding server object in the local DS database has no serverReference attribute
Windows XP/7/8/10 – The Directory Service failed to enter single user mode
Windows XP/7/8/10 – The Directory Service cannot parse the script because of a syntax error
Windows XP/7/8/10 – The Directory Service cannot process the script because of an error
Windows XP/7/8/10 – The directory service cannot perform the requested operation because the servers involved are of different replication epochs (which is usually related to a domain rename that is in progress)
Windows XP/7/8/10 – The directory service binding must be renegotiated due to a change in the server extensions information
Windows XP/7/8/10 – Operation not allowed on a disabled cross ref
Windows XP/7/8/10 – Schema update failed: No values for msDS-IntId are available
Windows XP/7/8/10 – Schema update failed: Duplicate msDS-INtId. Retry the operation
Windows XP/7/8/10 – Schema deletion failed: attribute is used in rDNAttID
Windows XP/7/8/10 – The directory service failed to authorize the request
Windows XP/7/8/10 – The Directory Service cannot process the script because it is invalid
Windows XP/7/8/10 – The remote create cross reference operation failed on the Domain Naming Master FSMO. The operation’s error is in the extended data
Windows XP/7/8/10 – A cross reference is in use locally with the same name
Windows XP/7/8/10 – The DS cannot derive a service principal name (SPN) with which to mutually authenticate the target server because the server’s domain has been deleted from the forest
Windows XP/7/8/10 – Writeable NCs prevent this DC from demoting
Windows XP/7/8/10 – The requested object has a non-unique identifier and cannot be retrieved
Windows XP/7/8/10 – Insufficient attributes were given to create an object. This object may not exist because it may have been deleted and already garbage collected
Windows XP/7/8/10 – The group cannot be converted due to attribute restrictions on the requested group type
Windows XP/7/8/10 – Cross-domain move of non-empty basic application groups is not allowed
Windows XP/7/8/10 – Cross-domain move of non-empty query based application groups is not allowed
Windows XP/7/8/10 – The FSMO role ownership could not be verified because its directory partition has not replicated successfully with at least one replication partner
Windows XP/7/8/10 – The target container for a redirection of a well known object container cannot already be a special container
Windows XP/7/8/10 – The Directory Service cannot perform the requested operation because a domain rename operation is in progress
Windows XP/7/8/10 – The directory service detected a child partition below the requested partition name. The partition hierarchy must be created in a top down method
Windows XP/7/8/10 – The directory service cannot replicate with this server because the time since the last replication with this server has exceeded the tombstone lifetime
Windows XP/7/8/10 – The requested operation is not allowed on an object under the system container
Windows XP/7/8/10 – The LDAP servers network send queue has filled up because the client is not processing the results of it’s requests fast enough. No more requests will be processed until the client catches up. If the client does not catch up then it will be disconnected
Windows XP/7/8/10 – The scheduled replication did not take place because the system was too busy to execute the request within the schedule window. The replication queue is overloaded. Consider reducing the number of partners or decreasing the scheduled replication frequency
Windows XP/7/8/10 – At this time, it cannot be determined if the branch replication policy is available on the hub domain controller. Please retry at a later time to account for replication latencies
Windows XP/7/8/10 – The site settings object for the specified site does not exist
Windows XP/7/8/10 – The local account store does not contain secret material for the specified account
Windows XP/7/8/10 – Could not find a writable domain controller in the domain
Windows XP/7/8/10 – The server object for the domain controller does not exist
Windows XP/7/8/10 – The NTDS Settings object for the domain controller does not exist
Windows XP/7/8/10 – The requested search operation is not supported for ASQ searches
Windows XP/7/8/10 – A required audit event could not be generated for the operation
Windows XP/7/8/10 – The search flags for the attribute are invalid. The subtree index bit is valid only on single valued attributes
Windows XP/7/8/10 – The search flags for the attribute are invalid. The tuple index bit is valid only on attributes of Unicode strings
Windows XP/7/8/10 – The address books are nested too deeply. Failed to build the hierarchy table
Windows XP/7/8/10 – The specified up-to-date-ness vector is corrupt
Windows XP/7/8/10 – The request to replicate secrets is denied
Windows XP/7/8/10 – Schema update failed: The MAPI identifier is reserved
Windows XP/7/8/10 – Schema update failed: There are no MAPI identifiers available
Windows XP/7/8/10 – The replication operation failed because the required attributes of the local krbtgt object are missing
Windows XP/7/8/10 – The domain name of the trusted domain already exists in the forest
Windows XP/7/8/10 – The flat name of the trusted domain already exists in the forest
Windows XP/7/8/10 – The User Principal Name (UPN) is invalid
Windows XP/7/8/10 – OID mapped groups cannot have members
Windows XP/7/8/10 – The specified OID cannot be found
Windows XP/7/8/10 – The replication operation failed because the target object referred by a link value is recycled
Windows XP/7/8/10 – DNS server unable to interpret format
Windows XP/7/8/10 – DNS server failure
Windows XP/7/8/10 – DNS name does not exist
Windows XP/7/8/10 – DNS request not supported by name server
Windows XP/7/8/10 – DNS operation refused
Windows XP/7/8/10 – DNS name that ought not exist, does exist
Windows XP/7/8/10 – DNS RR set that ought not exist, does exist
Windows XP/7/8/10 – DNS RR set that ought to exist, does not exist
Windows XP/7/8/10 – DNS server not authoritative for zone
Windows XP/7/8/10 – DNS name in update or prereq is not in zone
Windows XP/7/8/10 – DNS signature failed to verify
Windows XP/7/8/10 – DNS bad key
Windows XP/7/8/10 – DNS signature validity expired
Windows XP/7/8/10 – No records found for given DNS query
Windows XP/7/8/10 – Bad DNS packet
Windows XP/7/8/10 – No DNS packet
Windows XP/7/8/10 – DNS error, check rcode
Windows XP/7/8/10 – Unsecured DNS packet
Windows XP/7/8/10 – Invalid DNS type
Windows XP/7/8/10 – Invalid IP address
Windows XP/7/8/10 – Invalid property
Windows XP/7/8/10 – Try DNS operation again later
Windows XP/7/8/10 – Record for given name and type is not unique
Windows XP/7/8/10 – DNS name does not comply with RFC specifications
Windows XP/7/8/10 – DNS name is a fully-qualified DNS name
Windows XP/7/8/10 – DNS name is dotted (multi-label)
Windows XP/7/8/10 – DNS name is a single-part name
Windows XP/7/8/10 – DNS name contains an invalid character
Windows XP/7/8/10 – DNS name is entirely numeric
Windows XP/7/8/10 – The operation requested is not permitted on a DNS root server
Windows XP/7/8/10 – The record could not be created because this part of the DNS namespace has been delegated to another server
Windows XP/7/8/10 – The DNS server could not find a set of root hints
Windows XP/7/8/10 – The DNS server found root hints but they were not consistent across all adapters
Windows XP/7/8/10 – The specified value is too small for this parameter
Windows XP/7/8/10 – The specified value is too large for this parameter
Windows XP/7/8/10 – This operation is not allowed while the DNS server is loading zones in the background. Please try again later
Windows XP/7/8/10 – The operation requested is not permitted on against a DNS server running on a read-only DC
Windows XP/7/8/10 – No data is allowed to exist underneath a DNAME record
Windows XP/7/8/10 – This operation requires credentials delegation
Windows XP/7/8/10 – Name resolution policy table has been corrupted. DNS resolution will fail until it is fixed. Contact your network administrator
Windows XP/7/8/10 – DNS zone does not exist
Windows XP/7/8/10 – DNS zone information not available
Windows XP/7/8/10 – Invalid operation for DNS zone
Windows XP/7/8/10 – Invalid DNS zone configuration
Windows XP/7/8/10 – DNS zone has no start of authority (SOA) record
Windows XP/7/8/10 – DNS zone has no Name Server (NS) record
Windows XP/7/8/10 – DNS zone is locked
Windows XP/7/8/10 – DNS zone creation failed
Windows XP/7/8/10 – DNS zone already exists
Windows XP/7/8/10 – DNS automatic zone already exists
Windows XP/7/8/10 – Invalid DNS zone type
Windows XP/7/8/10 – Secondary DNS zone requires master IP address
Windows XP/7/8/10 – DNS zone not secondary
Windows XP/7/8/10 – Need secondary IP address
Windows XP/7/8/10 – WINS initialization failed
Windows XP/7/8/10 – Need WINS servers
Windows XP/7/8/10 – NBTSTAT initialization call failed
Windows XP/7/8/10 – Invalid delete of start of authority (SOA
Windows XP/7/8/10 – A conditional forwarding zone already exists for that name
Windows XP/7/8/10 – This zone must be configured with one or more master DNS server IP addresses
Windows XP/7/8/10 – The operation cannot be performed because this zone is shutdown
Windows XP/7/8/10 – Primary DNS zone requires datafile
Windows XP/7/8/10 – Invalid datafile name for DNS zone
Windows XP/7/8/10 – Failed to open datafile for DNS zone
Windows XP/7/8/10 – Failed to write datafile for DNS zone
Windows XP/7/8/10 – Failure while reading datafile for DNS zone
Windows XP/7/8/10 – DNS record does not exist
Windows XP/7/8/10 – DNS record format error
Windows XP/7/8/10 – Node creation failure in DNS
Windows XP/7/8/10 – Unknown DNS record type
Windows XP/7/8/10 – DNS record timed out
Windows XP/7/8/10 – Name not in DNS zone
Windows XP/7/8/10 – CNAME loop detected
Windows XP/7/8/10 – Node is a CNAME DNS record
Windows XP/7/8/10 – A CNAME record already exists for given name
Windows XP/7/8/10 – Record only at DNS zone root
Windows XP/7/8/10 – DNS record already exists
Windows XP/7/8/10 – Secondary DNS zone data error
Windows XP/7/8/10 – Could not create DNS cache data
Windows XP/7/8/10 – DNS name does not exist
Windows XP/7/8/10 – Could not create pointer (PTR) record
Windows XP/7/8/10 – DNS domain was undeleted
Windows XP/7/8/10 – The directory service is unavailable
Windows XP/7/8/10 – DNS zone already exists in the directory service
Windows XP/7/8/10 – DNS server not creating or reading the boot file for the directory service integrated DNS zone
Windows XP/7/8/10 – Node is a DNAME DNS record
Windows XP/7/8/10 – A DNAME record already exists for given name
Windows XP/7/8/10 – An alias loop has been detected with either CNAME or DNAME records
Windows XP/7/8/10 – DNS AXFR (zone transfer) complete
Windows XP/7/8/10 – DNS zone transfer failed
Windows XP/7/8/10 – Added local WINS server
Windows XP/7/8/10 – Secure update call needs to continue update request
Windows XP/7/8/10 – TCP/IP network protocol not installed
Windows XP/7/8/10 – No DNS servers configured for local system
Windows XP/7/8/10 – The specified directory partition does not exist
Windows XP/7/8/10 – The specified directory partition already exists
Windows XP/7/8/10 – This DNS server is not enlisted in the specified directory partition
Windows XP/7/8/10 – This DNS server is already enlisted in the specified directory partition
Windows XP/7/8/10 – The directory partition is not available at this time. Please wait a few minutes and try again
Windows XP/7/8/10 – The application directory partition operation failed. The domain controller holding the domain naming master role is down or unable to service the request or is not running Windows Server 2003
Windows XP/7/8/10 – A blocking operation was interrupted by a call to WSACancelBlockingCall
Windows XP/7/8/10 – The file handle supplied is not valid
Windows XP/7/8/10 – An attempt was made to access a socket in a way forbidden by its access permissions
Windows XP/7/8/10 – The system detected an invalid pointer address in attempting to use a pointer argument in a call
Windows XP/7/8/10 – An invalid argument was supplied
Windows XP/7/8/10 – Too many open sockets
Windows XP/7/8/10 – A non-blocking socket operation could not be completed immediately
Windows XP/7/8/10 – A blocking operation is currently executing
Windows XP/7/8/10 – An operation was attempted on a non-blocking socket that already had an operation in progress
Windows XP/7/8/10 – An operation was attempted on something that is not a socket
Windows XP/7/8/10 – A required address was omitted from an operation on a socket
Windows XP/7/8/10 – A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself
Windows XP/7/8/10 – A protocol was specified in the socket function call that does not support the semantics of the socket type requested
Windows XP/7/8/10 – An unknown, invalid, or unsupported option or level was specified in a getsockopt or setsockopt call
Windows XP/7/8/10 – The requested protocol has not been configured into the system, or no implementation for it exists
Windows XP/7/8/10 – The support for the specified socket type does not exist in this address family
Windows XP/7/8/10 – The attempted operation is not supported for the type of object referenced
Windows XP/7/8/10 – The protocol family has not been configured into the system or no implementation for it exists
Windows XP/7/8/10 – An address incompatible with the requested protocol was used
Windows XP/7/8/10 – Only one usage of each socket address (protocol/network address/port) is normally permitted
Windows XP/7/8/10 – The requested address is not valid in its context
Windows XP/7/8/10 – A socket operation encountered a dead network
Windows XP/7/8/10 – A socket operation was attempted to an unreachable network
Windows XP/7/8/10 – The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress
Windows XP/7/8/10 – An established connection was aborted by the software in your host machine
Windows XP/7/8/10 – An existing connection was forcibly closed by the remote host
Windows XP/7/8/10 – An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full
Windows XP/7/8/10 – A connect request was made on an already connected socket
Windows XP/7/8/10 – A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied
Windows XP/7/8/10 – A request to send or receive data was disallowed because the socket had already been shut down in that direction with a previous shutdown call
Windows XP/7/8/10 – Too many references to some kernel object
Windows XP/7/8/10 – A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond
Windows XP/7/8/10 – No connection could be made because the target machine actively refused it
Windows XP/7/8/10 – Cannot translate name
Windows XP/7/8/10 – Name component or name was too long
Windows XP/7/8/10 – A socket operation failed because the destination host was down
Windows XP/7/8/10 – A socket operation was attempted to an unreachable host
Windows XP/7/8/10 – Cannot remove a directory that is not empty
Windows XP/7/8/10 – A Windows Sockets implementation may have a limit on the number of applications that may use it simultaneously
Windows XP/7/8/10 – Ran out of quota
Windows XP/7/8/10 – Ran out of disk quota
Windows XP/7/8/10 – File handle reference is no longer available
Windows XP/7/8/10 – Item is not available locally
Windows XP/7/8/10 – WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable
Windows XP/7/8/10 – The Windows Sockets version requested is not supported
Windows XP/7/8/10 – Either the application has not called WSAStartup, or WSAStartup failed
Windows XP/7/8/10 – Returned by WSARecv or WSARecvFrom to indicate the remote party has initiated a graceful shutdown sequence
Windows XP/7/8/10 – No more results can be returned by WSALookupServiceNext
Windows XP/7/8/10 – A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled
Windows XP/7/8/10 – The procedure call table is invalid
Windows XP/7/8/10 – The requested service provider is invalid
Windows XP/7/8/10 – The requested service provider could not be loaded or initialized
Windows XP/7/8/10 – A system call has failed
Windows XP/7/8/10 – No such service is known. The service cannot be found in the specified name space
Windows XP/7/8/10 – The specified class was not found
Windows XP/7/8/10 – No more results can be returned by WSALookupServiceNext
Windows XP/7/8/10 – A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled
Windows XP/7/8/10 – A database query failed because it was actively refused
Windows XP/7/8/10 – No such host is known
Windows XP/7/8/10 – This is usually a temporary error during hostname resolution and means that the local server did not receive a response from an authoritative server
Windows XP/7/8/10 – A non-recoverable error occurred during a database lookup
Windows XP/7/8/10 – The requested name is valid, but no data of the requested type was found
Windows XP/7/8/10 – At least one reserve has arrived
Windows XP/7/8/10 – At least one path has arrived
Windows XP/7/8/10 – There are no senders
Windows XP/7/8/10 – There are no receivers
Windows XP/7/8/10 – Reserve has been confirmed
Windows XP/7/8/10 – Error due to lack of resources
Windows XP/7/8/10 – Rejected for administrative reasons – bad credentials
Windows XP/7/8/10 – Unknown or conflicting style
Windows XP/7/8/10 – Problem with some part of the filterspec or providerspecific buffer in general
Windows XP/7/8/10 – Problem with some part of the flowspec
Windows XP/7/8/10 – General QOS error
Windows XP/7/8/10 – An invalid or unrecognized service type was found in the flowspec
Windows XP/7/8/10 – An invalid or inconsistent flowspec was found in the QOS structure
Windows XP/7/8/10 – Invalid QOS provider-specific buffer
Windows XP/7/8/10 – An invalid QOS filter style was used
Windows XP/7/8/10 – An invalid QOS filter type was used
Windows XP/7/8/10 – An incorrect number of QOS FILTERSPECs were specified in the FLOWDESCRIPTOR
Windows XP/7/8/10 – An object with an invalid ObjectLength field was specified in the QOS provider-specific buffer
Windows XP/7/8/10 – An incorrect number of flow descriptors was specified in the QOS structure
Windows XP/7/8/10 – An unrecognized object was found in the QOS provider-specific buffer
Windows XP/7/8/10 – An invalid policy object was found in the QOS provider-specific buffer
Windows XP/7/8/10 – An invalid QOS flow descriptor was found in the flow descriptor list
Windows XP/7/8/10 – An invalid or inconsistent flowspec was found in the QOS provider specific buffer
Windows XP/7/8/10 – An invalid FILTERSPEC was found in the QOS provider-specific buffer
Windows XP/7/8/10 – An invalid shape discard mode object was found in the QOS provider specific buffer
Windows XP/7/8/10 – An invalid shaping rate object was found in the QOS provider-specific buffer
Windows XP/7/8/10 – A reserved policy element was found in the QOS provider-specific buffer
Windows XP/7/8/10 – No such host is known securely
Windows XP/7/8/10 – Name based IPSEC policy could not be added
Windows XP/7/8/10 – The specified quick mode policy already exists
Windows XP/7/8/10 – The specified quick mode policy was not found
Windows XP/7/8/10 – The specified quick mode policy is being used
Windows XP/7/8/10 – The specified main mode policy already exists
Windows XP/7/8/10 – The specified main mode policy was not foun
Windows XP/7/8/10 – The specified main mode policy is being used
Windows XP/7/8/10 – The specified main mode filter already exists
Windows XP/7/8/10 – The specified main mode filter was not found
Windows XP/7/8/10 – The specified transport mode filter already exists
Windows XP/7/8/10 – The specified transport mode filter does not exist
Windows XP/7/8/10 – The specified main mode authentication list exists
Windows XP/7/8/10 – The specified main mode authentication list was not found
Windows XP/7/8/10 – The specified main mode authentication list is being used
Windows XP/7/8/10 – The specified default main mode policy was not found
Windows XP/7/8/10 – The specified default main mode authentication list was not found
Windows XP/7/8/10 – The specified default quick mode policy was not found
Windows XP/7/8/10 – The specified tunnel mode filter exists
Windows XP/7/8/10 – The specified tunnel mode filter was not found
Windows XP/7/8/10 – The Main Mode filter is pending deletion
Windows XP/7/8/10 – The transport filter is pending deletion
Windows XP/7/8/10 – The tunnel filter is pending deletion
Windows XP/7/8/10 – The Main Mode policy is pending deletion
Windows XP/7/8/10 – The Main Mode authentication bundle is pending deletion
Windows XP/7/8/10 – The Quick Mode policy is pending deletion
Windows XP/7/8/10 – The Main Mode policy was successfully added, but some of the requested offers are not supported
Windows XP/7/8/10 – The Quick Mode policy was successfully added, but some of the requested offers are not supported
Windows XP/7/8/10 – ERROR_IPSEC_IKE_NEG_STATUS_BEGI
Windows XP/7/8/10 – IKE authentication credentials are unacceptabl
Windows XP/7/8/10 – IKE security attributes are unacceptabl
Windows XP/7/8/10 – IKE Negotiation in progres
Windows XP/7/8/10 – General processing erro
Windows XP/7/8/10 – Negotiation timed ou
Windows XP/7/8/10 – IKE failed to find valid machine certificate. Contact your Network Security Administrator about installing a valid certificate in the appropriate Certificate Store
Windows XP/7/8/10 – IKE SA deleted by peer before establishment complete
Windows XP/7/8/10 – IKE SA deleted before establishment complete
Windows XP/7/8/10 – Negotiation request sat in Queue too lon
Windows XP/7/8/10 – Negotiation request sat in Queue too lon
Windows XP/7/8/10 – Negotiation request sat in Queue too lon
Windows XP/7/8/10 – Negotiation request sat in Queue too lon
Windows XP/7/8/10 – No response from pee
Windows XP/7/8/10 – Negotiation took too lon
Windows XP/7/8/10 – Negotiation took too lon
Windows XP/7/8/10 – Unknown error occurre
Windows XP/7/8/10 – Certificate Revocation Check faile
Windows XP/7/8/10 – Invalid certificate key usag
Windows XP/7/8/10 – Invalid certificate typ
Windows XP/7/8/10 – IKE negotiation failed because the machine certificate used does not have a private key. IPsec certificates require a private key. Contact your Network Security administrator about replacing with a certificate that has a private key
Windows XP/7/8/10 – Simultaneous rekeys were detected
Windows XP/7/8/10 – Failure in Diffie-Hellman computatio
Windows XP/7/8/10 – Don’t know how to process critical payloa
Windows XP/7/8/10 – Invalid heade
Windows XP/7/8/10 – No policy configure
Windows XP/7/8/10 – Failed to verify signatur
Windows XP/7/8/10 – Failed to authenticate using Kerbero
Windows XP/7/8/10 – Peer’s certificate did not have a public ke
Windows XP/7/8/10 – Error processing error payloa
Windows XP/7/8/10 – Error processing SA payloa
Windows XP/7/8/10 – Error processing Proposal payloa
Windows XP/7/8/10 – Error processing Transform payloa
Windows XP/7/8/10 – Error processing KE payloa
Windows XP/7/8/10 – Error processing ID payloa
Windows XP/7/8/10 – Error processing Cert payloa
Windows XP/7/8/10 – Error processing Certificate Request payloa
Windows XP/7/8/10 – Error processing Hash payloa
Windows XP/7/8/10 – Error processing Signature payloa
Windows XP/7/8/10 – Error processing Nonce payloa
Windows XP/7/8/10 – Error processing Notify payloa
Windows XP/7/8/10 – Error processing Delete Payloa
Windows XP/7/8/10 – Error processing VendorId payloa
Windows XP/7/8/10 – Invalid payload receive
Windows XP/7/8/10 – Soft SA loade
Windows XP/7/8/10 – Soft SA torn dow
Windows XP/7/8/10 – Invalid cookie received
Windows XP/7/8/10 – Peer failed to send valid machine certificat
Windows XP/7/8/10 – Certification Revocation check of peer’s certificate faile
Windows XP/7/8/10 – New policy invalidated SAs formed with old polic
Windows XP/7/8/10 – There is no available Main Mode IKE policy
Windows XP/7/8/10 – Failed to enabled TCB privilege
Windows XP/7/8/10 – Failed to load SECURITY.DLL
Windows XP/7/8/10 – Failed to obtain security function table dispatch address from SSPI